FITCHBURG, WI —
OSHA Inspection: SARIS CYCLING GROUP, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SARIS CYCLING GROUP, INC. in 5253 VERONA ROAD, FITCHBURG, WI 53711 (NAICS 336991). OSHA activity number 345162416.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SARIS CYCLING GROUP, INC.
- Site address
- 5253 VERONA ROAD
- City
- FITCHBURG
- State
- WI
- ZIP
- 53711
- Mailing
- 5253 VERONA ROAD, FITCHBURG, WI 53711
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336991
- Employees
- 205
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.217 C03 VII C
- Issued
- May 18, 2021
- Abate by
- Jun 9, 2021
- Penalty
- Initial $12,288 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(c)(3)(vii)(c): The safety distance (D(s)) between each two hand control device and the point of operation shall be greater than the distance determined by the following formula: D(s) = 63 inches/second X T(s); where: D(s) = minimum safety distance (inches); 63 inches/second=hand speed constant; and T(s) = stopping time of the press measured at approximately 90 deg. position of crankshaft rotation (seconds). On or about April 23, 2021, the safety distance from the two hand control device to the point of operation of the Komatsu 80-ton mechanical punch press (Press #2, S/N 10700) was less than the distance determined by stop time measurements.
Recent events (2)
- — I (S) $0
- — Z (S) $12288
1910.217 C03 VII D
- Issued
- May 18, 2021
- Abate by
- Jul 9, 2021
- Penalty
- Initial $0 · Current $5,595
General-duty citation text
29 CFR 1910.217(c)(3)(vii)(d): Two hand controls were not fixed in position so that only a supervisor or safety engineer was capable of relocating the controls: On or about February 24, 2021, the two hand controls on the Rousselle 150 ton mechanical punch press (Press #1, S/N 27564), the Komatsu 80 ton mechanical punch press (Press #2, S/N 10070), the Rousselle 100 ton mechanical punch press (Press #3, S/N P-24851-RF), and the Rousselle 40 ton mechanical punch press (Press #5, S/N P30451) were not fixed in position.
Recent events (2)
- — I (S) $5595
- — Z (S) $0
1910.217 C02 I B
- Issued
- May 18, 2021
- Abate by
- Jul 9, 2021
- Penalty
- Initial $8,778 · Current $5,595 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(b): Point of operation guard(s) on mechanical power press(es) did not conform to the maximum permissible opening(s) specified in Table 10 O-10: On or about April 7, 2021, point of operation guards on the Rousselle 40 ton mechanical punch press (Press #5, S/N P30451) had distances of opening of 5 inches and 10.5 inches to the point of operation that did not conform to the maximum permissible opening(s) specified in Table 10 O-10.
Recent events (2)
- — I (S) $5595
- — Z (S) $8778
More inspections at Saris Cycling Group, INC.
View Saris Cycling Group, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336991)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345162416.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.