NAMPA, ID —
OSHA Inspection: B & W WRECKER SERVICE, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of B & W WRECKER SERVICE, LLC in 16312 FRANKLIN ROAD, NAMPA, ID 83651 (NAICS 488410). OSHA activity number 345165773.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B & W WRECKER SERVICE, LLC
- Site address
- 16312 FRANKLIN ROAD
- City
- NAMPA
- State
- ID
- ZIP
- 83651
- Mailing
- 20 SOUTH GARDEN STREET, BOISE, ID 83705
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 488410
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 20, 2021
- Abate by
- Aug 10, 2021
- Penalty
- Initial $5,461 · Current $5,461
General-duty citation text
29 CFR OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards of being struck by tow rigging that was subjected to a force in excess of its breaking strength: a) On February 25, 2021, employees attempted to recover a 30,685 lbs. JCB load-all telescopic handler that was stuck in the mud. As a part of the rigging equipment, employees used two Laclede single hook 3/8 inch 43 grade tow chains, with a working load limit of 5,400 lbs. each. The employer had not provided training to their employees that would enable them to critically evaluate requirements for a heavy-duty winch-out. The employees failed to recognize the forces needed, and advanced rigging equipment and techniques needed to recover this equipment. Employees did not determine if the recovery equipment used had the capacity and working load limit(s) to safely accomplish the task. b) On February 25, 2021, employees attempted to recover a JCB load-all telescopic handler from the mud. The employees stood in the veer angle of rigging components that were under tension and were exposed to being struck by wire rope, tow chains, the snatch block and other rigging. Note) Certification and documentation of corrective actions are required for these items.
Recent events (2)
- — I (S) $5461
- — Z (S) $5461
1910.184 C04
- Issued
- Jul 20, 2021
- Abate by
- Aug 31, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(c)(4): Slings were loaded in excess of their rated capacities: a) On February 25, 2021 and at times prior thereto employees used a Laclede, 3/8 inch, 43 grade chain as part of the rigging in an attempt to recover a JCB load-all telescopic handler, weighing 30,685 pounds that was mired in the mud. The chain failed in tension when the forces applied exceeded the breaking strength of the chain, exposing employees to being struck-by parts of the rigging. Note) Certification and documentation of corrective action is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Jul 20, 2021
- Abate by
- Aug 31, 2021
- Penalty
- Initial $3,121 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) On February 25, 2021 and at times prior thereto the employer had not developed, or provided powered industrial truck training for employees that included formal instruction, practical training and an evaluation of performance for truck related topics and work-place related topics. Employees operate powered industrial trucks at the company location and other locations, which may involve driving on and off drive-off trailers. Note) Certification of corrective action is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $3121
1904.29 B03
- Issued
- Jul 20, 2021
- Abate by
- Jul 21, 2021
- Penalty
- Initial $780 · Current $200 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not recorded on the OSHA 300 Log and 301 Incident Report within seven (7) calendar days of receiving information that a recordable injury or illness had occurred: a) On February 25, 2021 the employer had not made a timely record of a work place injury which occurred on February 17, 2021. An employee was injured on the job which ultimately resulted in approximately 1 month away from work. Note) Certification of corrective action is required for this item.
Recent events (2)
- — I (O) $200
- — Z (O) $780
More inspections in this industry (NAICS 488410)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345165773.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.