FORNEY, TX —
OSHA Inspection: MIGUEL JIMENES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIGUEL JIMENES in 1012 LYNX HOLLOW TRAIL, FORNEY, TX 75126 (NAICS 238130). OSHA activity number 345189161.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIGUEL JIMENES
- Site address
- 1012 LYNX HOLLOW TRAIL
- City
- FORNEY
- State
- TX
- ZIP
- 75126
- Mailing
- 2850 S. BELT LINE ROAD #131, DALLAS, TX 75253
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Mar 18, 2021
- Penalty
- Initial $3,511 · Current $3,511
General-duty citation text
29 CFR 1926.100(a):Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a) This violation occurred on or about March 10, 2021, at the job-site located at 1012 Lynx Hollow Trail; where employees were framing a single family house and were exposed to head injuries where overhead hazard exists by not wearing hard hats.
Recent events (1)
- — Z (S) $3511
1926.102 A01
- Issued
- Mar 18, 2021
- Abate by
- Apr 13, 2021
- Penalty
- Initial $3,511 · Current $3,511
General-duty citation text
29 CFR 1926.102(a)(1):Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: (a) This violation occurred on or about March 10, 2021, at the job-site located at 1012 Lynx Hollow Trail; where employees were doing framing work while using a Makita circular saw model 5007F, serial number 2170179. Employees were not wearing safety glasses and were exposed to eye injuries.
Recent events (1)
- — Z (S) $3511
1926.501 B13
- Issued
- Mar 18, 2021
- Abate by
- Apr 13, 2021
- Penalty
- Initial $4,096 · Current $4,096
General-duty citation text
29 CFR 1926.501(b)(13):Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502: (a) This violation occurred on or about March 10, 2021, at the job-site located at 1012 Lynx Hollow Trail; where employees doing framing work were exposed to a fall hazard:
Recent events (1)
- — Z (S) $4096
1926.1051 A
- Issued
- Mar 18, 2021
- Abate by
- Apr 13, 2021
- Penalty
- Initial $4,096 · Current $4,096
General-duty citation text
29 CFR 1926.1051(a):Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided: (a) This violation occurred on or about March 10, 2021, at the job-site located at 1012 Lynx Hollow Trail; where employees were not provided with a ladder for access and/or egress to and from the upper working levels. Employees were exposed to a fall hazard.
Recent events (1)
- — Z (S) $4096
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345189161.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.