Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GERMAN CRUZ

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of GERMAN CRUZ in 7661 HIGHWAY 431, ALBERTVILLE, AL 35950 (NAICS 238140). OSHA activity number 345193510.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch German Cruz — free Get an email when a new federal OSHA severe-injury report for German Cruz is published. One employer, no account, unsubscribe in one click.
Establishment
GERMAN CRUZ
Site address
7661 HIGHWAY 431
City
ALBERTVILLE
State
AL
ZIP
35950
Mailing
23348 SILVER SPRINGS ROAD, ABITA SPRINGS, LA 70420
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 3 instances 2 exposed
Issued
Oct 15, 2021
Abate by
Nov 19, 2021
Penalty
Initial $329 · Current $329
29 CFR  1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section:  (a) On or about 10/15/2021, the employer failed to submit certification of corrective action for citation #1, item #1 issued on 08/09/2021 with an abatement due date of September 02, 2021.  (b) On or about 10/15/2021, the employer failed to submit certification of corrective action for citation #1, item #2 issued on 08/09/2021 with an abatement due date of September 02, 2021.  (c) On or about 10/15/2021, the employer failed to submit certification of corrective action for citation #1, item #3 issued on 08/09/2021 with an abatement due date of September 02, 2021.
Recent events (1)
  • — Z (O) $329

1926.451 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 9, 2021
Abate by
Sep 2, 2021
Penalty
Initial $2,341 · Current $2,341
29 CFR  1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):  (a) On or about 03/03/2021 - 7661 Highway 431, Albertville, AL, employees were exposed to fall hazards of approximately 6 to 12 feet when some areas of the scaffold were not fully planked.
Recent events (1)
  • — Z (S) $2341

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 9, 2021
Abate by
Sep 2, 2021
Penalty
Initial $2,926 · Current $2,926
29 CFR  1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used:  (a) On or about 03/03/2021 - 7661 Highway 431, Albertville, AL, employees were exposed to fall hazards  of 6 to 18 feet when employees had to climb the scaffold frame to access the scaffold levels.  The scaffold frame was not specifically designed and constructed for use as ladder rungs.
Recent events (1)
  • — Z (S) $2926

1926.451 G04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 9, 2021
Abate by
Sep 2, 2021
Penalty
Initial $2,341 · Current $2,341
29 CFR  1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:  (a) On or about o3/03/2021 - 7661 Highway 431, Albertville, AL, employees were exposed to fall hazards of approximately 12 feet when crossbracing was installed as a top rail and no mid rail was installed on the open sides of the scaffolds.
Recent events (1)
  • — Z (S) $2341

View German Cruz's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345193510.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.