FREDERIC, WI —
OSHA Inspection: APPLIED MOLDING TECHNOLOGIES, LLC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of APPLIED MOLDING TECHNOLOGIES, LLC. in 509 WISCONSIN AVENUE SOUTH, FREDERIC, WI 54837 (NAICS 333249). OSHA activity number 345194922.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- APPLIED MOLDING TECHNOLOGIES, LLC.
- Site address
- 509 WISCONSIN AVENUE SOUTH
- City
- FREDERIC
- State
- WI
- ZIP
- 54837
- Mailing
- 509 WISCONSIN AVENUE SOUTH, FREDERIC, WI 54837
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333249
- Employees
- 25
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Jul 16, 2021
- Abate by
- Sep 3, 2021
- Penalty
- Initial $3,433 · Current $3,433
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Thermoset, F.J. Stokes Machine, Co.; Open rotating and moving parts on the machine were not adequately guarded.
Recent events (1)
- — Z (S) $3433
1910.305 G01 IV A
- Issued
- Jul 16, 2021
- Abate by
- Sep 3, 2021
- Penalty
- Initial $5,149 · Current $5,149
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a)Thermoset, Press T-10; A portable relocatable power tap (power strip) was used to provide electrical power to equipment in place of permanent wiring for two scales, a microwave, and a 17 inch drill press. (b)Thermoset, Press T-16; A portable relocatable power tap (power strip) was used to provide electrical power to equipment in place of permanent wiring for a scale and a 13 inch drill press. (c) Thermoset Press, T-19; A portable relocatable power tap (power strip) was used to provide electrical power to equipment in place of permanent wiring for a scale and a 17 inch drill press.
Recent events (1)
- — Z (S) $5149
1910.1048 D01 I
- Issued
- Jul 16, 2021
- Abate by
- Oct 19, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1048(d)(1)(i): Employees of a workplace covered by this standard were not monitored to determine their exposure to formaldehyde: (a) Thermoset; Air monitoring had not been conducted to determine employees' exposure; several chemical compounds utilized including, but not limited to, Plenco 02300, 02308, and 02535 contained formaldehyde.
Recent events (2)
- — Z $770
- — Z (O) $0
More inspections at Applied Molding Technologies, LLC.
View Applied Molding Technologies, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 333249)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345194922.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.