Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UWC CUSTOM BUILDER LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of UWC CUSTOM BUILDER LLC in 725 FRIENDSHIP ROAD, PORT ARANSAS, TX 78373 (NAICS 238130). OSHA activity number 345196240.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch UWC Custom Builder LLC — free Get an email when a new federal OSHA severe-injury report for UWC Custom Builder LLC is published. One employer, no account, unsubscribe in one click.
Site address
725 FRIENDSHIP ROAD
City
PORT ARANSAS
State
TX
ZIP
78373
Mailing
830 OCEANSIDE, PORT ARANSAS, TX 78373
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
1
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 16, 2021
Penalty
Initial $2,926 · Current $0 Reduced
29 CFR  1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns.    On or about March 10, 2021 at this workplace, employees conducted framing operations from scaffolding 10 feet  above a lower level  and the employees were not wearing protective helmets to protect from head injuries.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2926

1926.451 A06

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 16, 2021
Penalty
Initial $2,926 · Current $0 Reduced
29 CFR  1926.451(a)(6):Scaffolds were not designed by a qualified person.  On or about March 10, 2021 at this workplace employees conducted framing operations from scaffolding that was not designed by a qualified person.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2926

1926.451 B01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 16, 2021
Penalty
Initial $2,926 · Current $0 Reduced
29 CFR  1926.451(b)(1): Each platform on all working levels of scaffolds shall be fully planked or decked between the front uprights and the guardrail supports as follows:   On or about March 3, 2021 at this workplace,  employees conducted framing operations on scaffolds above ten feet above the lower level and the platform was not fully planked.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2926

1926.451 E01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 16, 2021
Penalty
Initial $2,926 · Current $0 Reduced
29 CFR  1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  On or about March 10, 2021 at this workplace employees conducted framing operations from scaffolding  above ten feet  without a attachable ladder for access.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2926

1926.451 G01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 16, 2021
Penalty
Initial $2,926 · Current $0 Reduced
29 CFR  1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:   On or about March 10, 2021 at this workplace, employees on scaffolds conducted framing operations at ten feet above a lower level without a fall protection system in place.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2926

1926.451 G01 VII

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 16, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.   On or about March 10, 2021 at this workplace, employees conducted framing operations greater than ten feet without a personal fall arrest system or guardrail system in place.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345196240.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.