Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: J.D SHEET METAL & ROOFING

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of J.D SHEET METAL & ROOFING in 1714 DANCING EAGLE, SAN ANTONIO, TX 78258 (NAICS 238160). OSHA activity number 345205611.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch J.D Sheet Metal & Roofing — free Get an email when a new federal OSHA severe-injury report for J.D Sheet Metal & Roofing is published. One employer, no account, unsubscribe in one click.
Site address
1714 DANCING EAGLE
City
SAN ANTONIO
State
TX
ZIP
78258
Mailing
369 MILLENNIUM DRIVE, KYLE, TX 78640
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
8
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 1 exposed
Issued
May 25, 2021
Abate by
Jun 14, 2021
Penalty
Initial $1,755 · Current $1,053 Reduced
29 CFR  1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  Dancing Eagle Way, San Antonio, TX:  On or about March 19, 2021 and at times thereto, workers were exposed to struck by hazards while using hand tools to cut ventilation piping, without adequate eye protection.
Recent events (2)
  • — I (S) $1053
  • — Z (S) $1755

1926.1053 B01

Serious Gravity 5 1 instance 1 exposed
Issued
May 25, 2021
Penalty
Initial $2,341 · Current $1,405 Reduced
29 CFR  1926.1053(b)(1):Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder:  1714 Dancing Eagle, San Antonio, TX. 78258: On or about March 19, 2021, and at times prior thereto, workers were exposed to fall hazards while descending extension ladders whose side rails did not extend 3 feet above the upper landing.
Recent events (2)
  • — I (S) $1404.6
  • — Z (S) $2341

1926.1060 A

Serious Gravity 5 1 instance 1 exposed
Issued
May 25, 2021
Abate by
Jun 21, 2021
Penalty
Initial $3,511 · Current $2,107 Reduced
29 CFR  1926.1060(a):The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards:  1714 Dancing Eagle, San Antonio, TX. 78258: On or about March 19, 2021, and at times prior thereto, workers were exposed to fall hazards while using an extension ladder placed on unstable ground without being trained to recognize the hazards of falls.
Recent events (2)
  • — I (S) $2106.6
  • — Z (S) $3511

View J.D Sheet Metal & Roofing's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345205611.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.