UTICA, NY —
OSHA Inspection: GAUTHIER SHEET METAL, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of GAUTHIER SHEET METAL, INC. in 1201 BROAD ST., UTICA, NY 13501 (NAICS 332322). OSHA activity number 345211403.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GAUTHIER SHEET METAL, INC.
- Site address
- 1201 BROAD ST.
- City
- UTICA
- State
- NY
- ZIP
- 13501
- Mailing
- 1201 BROAD ST., UTICA, NY 13501
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 I
- Issued
- Sep 17, 2021
- Penalty
- Initial $2,340 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) At the establishment, on or about 3/22/21: Employees operating powered industrial trucks including but not limited to: Yale and Hyster were not provided with training.
Recent events (2)
- — I (O) $0
- — Z (S) $2340
1910.178 L04 III
- Issued
- Sep 17, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) At the establishment, on or about 3/22/2021: The employer had not provided an evaluation of each powered industrial truck operator at least once every three years. Last training was conducted June 2017. Employees operating powered industrial trucks including but not limited to: Yale and Hyster.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Sep 17, 2021
- Penalty
- Initial $2,340 · Current $2,340
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met; specifically: 1) Labeling and other forms of warning; 2) SDS requirements for the hazardous materials known to be present at the jobsite; 3) Employee training and information. The written program must also include: (a) A list of all the chemicals used at the jobsite. (b) Methods to inform employees of hazards associated with non-routine tasks. (c) Methods the employer will use to inform any contractors employees of workplace hazards. a) At the establishment, on or about 3/22/2021: A written hazard communication program was not developed for the employees who work with hazardous materials including but not limited to: Acetylene; Argon; Helium; Hydrogen; Oxygen; Propane; Stainless Steel; Carbon Steel and Aluminum.
Recent events (2)
- — I (S) $2340
- — Z (S) $2340
1910.1200 H01
- Issued
- Sep 17, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) At the establishment, on or about 3/22/2021: Employees were exposed to hazardous chemicals such as, but not limited to: Acetylene; Argon; Helium; Hydrogen; Oxygen; Propane; Stainless Steel; Carbon Steel and Aluminum and were not provided information and training as specified in 29 CFR 1910.1200(h)(1) and (2).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1026 D01
- Issued
- Sep 17, 2021
- Penalty
- Initial $0 · Current $0
0689
General-duty citation text
29 CFR 1910.1026(d)(1):The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): a) At the establishment, on or about 3/22/21: The exposure to Chromium (VI) was not determined for employees Tig Welding on Stainless Steel Alloy.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Gauthier Sheet Metal, INC.
View Gauthier Sheet Metal, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345211403.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.