FAIRFIELD, ME —
OSHA Inspection: MAINELY HANDRAILS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MAINELY HANDRAILS LLC in 25 WEST STREET, FAIRFIELD, ME 04937 (NAICS 332999). OSHA activity number 345213730.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAINELY HANDRAILS LLC
- Site address
- 25 WEST STREET
- City
- FAIRFIELD
- State
- ME
- ZIP
- 04937
- Mailing
- 25 WEST STREET, FAIRFIELD, ME 04937
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 12
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.157 E02
- Issued
- May 7, 2021
- Abate by
- Jun 3, 2021
- Penalty
- Initial $2,340 · Current $1,638 Reduced
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: Building - Dry chemical multipurpose fire extinguishers were not visually inspected at least monthly throughout the facility.
Recent events (2)
- — I (S) $1638
- — Z (S) $2340
1910.157 E03
- Issued
- May 7, 2021
- Abate by
- Jun 3, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: Building - Dry chemical multipurpose fire extinguishers were not subjected to an annual maintenance check throughout the facility.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $2,340 · Current $1,638 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Welding Shop - A Craftsman Drill press was not provided machine guarding to protect the employees from rotating parts at the point of operation.
Recent events (2)
- — I (S) $1638
- — Z (S) $2340
1910.215 B09
- Issued
- May 7, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $2,340 · Current $1,638 Reduced
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Welding Shop - The distance between the abrasive wheel and the adjustable tongue end of the safety guard on the Ryobi bench grinder exceeded one fourth inch.
Recent events (2)
- — I (S) $1638
- — Z (S) $2340
1910.243 C01
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $2,340 · Current $1,638 Reduced
General-duty citation text
29 CFR 1910.243(c)(1):Abrasive wheels were used on portable grinders which were not provided with safety guard that meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4). Welding Shop - Two abrasive wheels that were used on portable grinders were not provided with safety guards.
Recent events (2)
- — I (S) $1638
- — Z (S) $2340
1910.303 G02 I
- Issued
- May 7, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $5,461 · Current $3,823 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i):Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures: Sandblasting Room Hallway - An electrical panel with exposed live parts was not guarded against accidental contact.
Recent events (2)
- — I (S) $3822.7
- — Z (S) $5461
1910.1200 E01
- Issued
- May 7, 2021
- Abate by
- Jun 3, 2021
- Penalty
- Initial $2,340 · Current $1,638 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200 (f), (g), and (h) will be met: Office - The employer did not develop and implement a written hazard communication program that included the provisions of the Globally Harmonized System (GHS) and a description of how the provisions of paragraphs (f), (g) and (h) will be met.
Recent events (2)
- — I (S) $1638
- — Z (S) $2340
1904.29 A
- Issued
- May 7, 2021
- Abate by
- May 19, 2021
- Penalty
- Initial $780 · Current $546 Reduced
General-duty citation text
29 CFR 1904.29(a):The employer did not use an OSHA 300, 301 and 300A Form or equivalent. Office - The employer did not maintain OSHA 300 and 300A forms or equivalent.
Recent events (2)
- — I (O) $546
- — Z (O) $780
1910.242 B
- Issued
- May 7, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. Welding Shop - Compressed air line used for cleaning purposes was not reduced to less than 30 p.s.i.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Mainely Handrails LLC
View Mainely Handrails LLC's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345213730.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.