Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HI-TEC FINISHING, LLC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of HI-TEC FINISHING, LLC. in 581 COUNTY ROAD A, HUDSON, WI 54016 (NAICS 332812). OSHA activity number 345235105.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hi-Tec Finishing, LLC. — free Get an email when a new federal OSHA severe-injury report for Hi-Tec Finishing, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
581 COUNTY ROAD A
City
HUDSON
State
WI
ZIP
54016
Mailing
581 COUNTY ROAD A, HUDSON, WI 54016
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332812
Employees
16
Ownership type
A

8 citations on file for this inspection.

1910.106 E02 II B 2

Serious Gravity 1 1 instance 16 exposed
Issued
May 3, 2021
Abate by
May 11, 2021
Penalty
Initial $2,340 · Current $1,638 Reduced
29 CFR  1910.106(e)(2)(ii)(b)(2): The quantity of Category 2, 3 or 4 flammable liquid located outside of an inside storage room or storage cabinet in a building or in any one fire area of a building exceeded 120 gallons:   (a) Throughout the facility; Greater than 120 gallons of Category 2 flammable liquids were stored outside of an inside storage room and/or cabinet to include, but not be limited to, lacquer thinner, paint, and gun wash blend.
Recent events (2)
  • — I (S) $1638
  • — Z (S) $2340

1910.107 B05 IV

Serious Gravity 1 1 instance 1 exposed
Issued
May 3, 2021
Abate by
Aug 13, 2021
Penalty
Initial $2,340 · Current $1,638 Reduced
29 CFR  1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers:  (a) Spray Booth 5/6; The spray booth utilized for spraying flammable paints was not protected by an automatic fire suppression system.
Recent events (2)
  • — I (S) $1638
  • — Z (S) $2340

1910.134 C01

Serious Gravity 5 1 instance 6 exposed
Issued
May 3, 2021
Abate by
Jun 22, 2021
Penalty
Initial $3,901 · Current $2,731 Reduced
29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  (a) Throughout the facility; A written respiratory protection program with worksite specific procedures was not established and implemented for required use of half facepiece elastomeric respirators per spray finishing tasks.
Recent events (2)
  • — I (S) $2731
  • — Z (S) $3901

1910.134 E01

Serious Gravity 5 1 instance 6 exposed
Issued
May 3, 2021
Abate by
Jun 22, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:   (a) Throughout the facility;  Medical evaluations were not provided to employees required to use half facepiece elastomeric respirators during spray finishing tasks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Serious Gravity 5 1 instance 6 exposed
Issued
May 3, 2021
Abate by
Jun 22, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter:   (a) Throughout the facility; Employees required to wear tight-fitting  half facepiece elastomeric respirators per spray finishing tasks were not fit tested prior to initial use and/or on an annual basis.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K01

Serious Gravity 5 1 instance 6 exposed
Issued
May 3, 2021
Abate by
Jun 22, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.134(k)(1): The employer did not provide effective training to ensure that each employee could demonstrate knowledge of 1910.134(k)(1)(i) - (vii):  (a) Throughout the facility; Prior to respirator use, the employer did not provide training for employees required to use half facepiece elastomeric respirators per spray finishing tasks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 8 exposed
Issued
May 3, 2021
Abate by
Jun 22, 2021
Penalty
Initial $3,121 · Current $2,185 Reduced
29 CFR  1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  (a) Throughout the facility; The employer did not develop and implement a written hazard communication program to address employee exposure to chemicals utilized in the facility such as, but not limited to, paints, catalysts, and reducers.
Recent events (2)
  • — I (S) $2185
  • — Z (S) $3121

1910.1200 H01

Serious Gravity 5 1 instance 8 exposed
Issued
May 3, 2021
Abate by
Jun 22, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   (a) Throughout the facility; The employer did not provide information and training prior to employees' use of chemicals such as, but not limited to, paints, catalysts, and reducers utilized for spray finishing tasks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345235105.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.