Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MARGARITO VARGAS DBA ARMANDO'S CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MARGARITO VARGAS DBA ARMANDO'S CONSTRUCTION in 3325 W BELMONT AVE, CHICAGO, IL 60618 (NAICS 238140). OSHA activity number 345237259.

Watch Margarito Vargas DBA Armando'S Construction — free Get an email when a new federal OSHA severe-injury report for Margarito Vargas DBA Armando'S Construction is published. One employer, no account, unsubscribe in one click.
Site address
3325 W BELMONT AVE
City
CHICAGO
State
IL
ZIP
60618
Mailing
4912 W IOWA ST, CHICAGO, IL 60651
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2341.00 · Current $2341.00
29 CFR  1926.100(a):Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a)  On April 7, 2021, employees not wearing hard hats were exposed to struck-by hazards from employees working on a scaffold above.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $2341

1926.451 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2926.00 · Current $2926.00
29 CFR  1926.451(b)(2):Scaffold platforms and walkways were not at least 18 inches wide:  a)  On April 7, 2021, employees were working from a suspension scaffold platform that was 12 inches wide.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $2926

1926.451 D16

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(d)(16): In addition to the normal operating brake, suspension scaffold power-operated hoists and manually operated hoists did not have a braking device or locking pawl which engages automatically when a hoist makes either of the following uncontrolled movements: an instantaneous change in momentum or an accelerated overspeed:  a)  On April 7, 2021, employees were working from a manually operated two-point adjustable suspension scaffold that did not have a braking device or locking pawl.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

1926.451 D17

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(d)(17):  Manually operated hoists did not have a positive crank force to descend:  a)  On April 7, 2017, employees were working from a two-point adjustable suspension scaffold where the manually operated hoist did not have a positive crank force to descend.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

1926.451 G04 II

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(4)(ii): The top edge height on all suspended scaffolds where both a guardrail and a personal fall arrest system are required shall be between 36 inches (0.9 m) and 45 inches (1.2 m) above the platform surface:  a)  On April 7, 2021, employees were working from a suspension scaffold platform that was not equipped with a toprail.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

1926.451 G03 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2926.00 · Current $2926.00
29 CFR 1926.451(g)(3)(i): Vertical lifelines were not fastened to a fixed safe point of anchorage, independent of the scaffold, and protected from sharp edges and abrasion.  Safe points of anchorage include structural members of buildings, but do not include standpipes, vents, other piping systems, electrical conduit, outrigger beams, or counterweights:  a)  On April 7, 2021, employees were connected to vertical lifelines that were not protected from abrasion.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $2926

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345237259.