Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PVK CONSTRUCTION INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PVK CONSTRUCTION INC. in 2112 W MCLEAN AVE, CHICAGO, IL 60647 (NAICS 238140). OSHA activity number 345237283.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch PVK Construction INC. — free Get an email when a new federal OSHA severe-injury report for PVK Construction INC. is published. One employer, no account, unsubscribe in one click.
Site address
2112 W MCLEAN AVE
City
CHICAGO
State
IL
ZIP
60647
Mailing
7004 W SCHOOL ST, CHICAGO, IL 60634
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238140
Employees
7
Ownership type
A

7 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 13, 2021
Abate by
Aug 6, 2021
Penalty
Initial $3,433 · Current $3,433
29 CFR 1926.602(d):  The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):  29 CFR 1910.178(l)(1)(i):  The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a)  On or about April 7, 2021, the employer provided employees with a Lull 1044C-54 rough terrain forklift without ensuring they were competent to operate the equipment safely, as demonstrated by successful completion of forklift training and evaluation.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $3433

1926.451 E01

Serious Gravity 5 1 instance 7 exposed
Issued
Jul 13, 2021
Penalty
Initial $4,291 · Current $4,291
29 CFR 1926.451(e)(1):  Portable ladder, hook-on ladder, attachable ladder, stair tower, stairway-type ladder, ramp, runway, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used to access scaffold platforms more than 2 feet above or below a point of access:   a)  On April 7, 2021, employees were exposed to a fall hazards while accessing and egressing the work platform of a frame scaffold.  No abatement certification or documentation is required for this item.
Recent events (1)
  • — Z (S) $4291

1926.451 G01

Serious Gravity 10 1 instance 7 exposed
Issued
Jul 13, 2021
Penalty
Initial $6,007 · Current $6,007
29 CFR 1926.451(g)(1):  Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:  a)  On April 7, 2021, employees working from frame scaffolding were exposed to fall hazards of greater than 16 feet.  No abatement certification or documentation is required for this item.
Recent events (1)
  • — Z (S) $6007

1926.454 A

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 13, 2021
Abate by
Aug 6, 2021
Penalty
Initial $4,291 · Current $4,291
29 CFR 1926.454(a):  The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:  a)  On or about April 7, 2021, employees were not trained to recognize and eliminate the hazards associated with working from scaffolding.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $4291

1926.1153 D02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 13, 2021
Abate by
Aug 6, 2021
Penalty
Initial $4,291 · Current $4,291
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) On or about April 7, 2021, the employer did not assess the exposure of employee(s) mixing mortar containing crystalline silica using a gas powered mixer.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $4291

1926.1153 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 13, 2021
Abate by
Aug 6, 2021
Penalty
Initial $0 · Current $0
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan:  a) On or about April 7, 2021, the employer did not establish and implement a written silica exposure control plan that complied with the requirements of 1926.1153(g)(1)(i) through (iv) when employees were mixing mortar containing crystalline silica with a gas powered mixer.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

1926.1153 I01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 13, 2021
Abate by
Aug 6, 2021
Penalty
Initial $0 · Current $0
29 CFR 1926.1153(i)(1): The employer did not ensure that each employee was trained in accordance with the provisions of hazard communication standard and paragraph (i)(2) of this section:  a) On or about April 7, 2021, the employer did not ensure that all employees exposed to crystalline silica received training required by the hazard communication standard and 29 CFR 1926.1153(i)(2).  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

View PVK Construction INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345237283.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.