SAN ANTONIO, TX —
OSHA Inspection: MIGUEL MARTINEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIGUEL MARTINEZ in 23007 EVANGELINE, SAN ANTONIO, TX 78258 (NAICS 238130). OSHA activity number 345237440.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIGUEL MARTINEZ
- Site address
- 23007 EVANGELINE
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78258
- Mailing
- 4702 TRAILWOOD DR., SAN ANTONIO, TX 78228
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.300 A
- Issued
- Aug 20, 2021
- Abate by
- Sep 1, 2021
- Penalty
- Initial $2,341 · Current $2,341
General-duty citation text
29 CFR 1926.300(a): Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition: a) Residential Construction Site: On or about April 7, 2021, and at times prior thereto, employees were exposed to an electrical hazard, while using a Makita Circular Saw that had damage to the outer insulation jacket near the strain relief of the electrical cord. b) Residential Construction Site: On or about April 7, 2021, and at times prior thereto, employees were exposed to an electrical hazard, while using a Makita Circular Saw that had damage to the outer insulation jacket on the electrical cord.
Recent events (1)
- — Z (S) $2341
1926.405 G02 IV
- Issued
- Aug 20, 2021
- Abate by
- Sep 1, 2021
- Penalty
- Initial $2,341 · Current $2,341
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: Residential Construction Site: On or about April 7, 2021, and at times prior thereto, employees were exposed to an electrical hazard, while using a Makita Circular Saw that was connected to an extension cord with the outer insulation jacket pulled from the plug.
Recent events (1)
- — Z (S) $2341
1926.451 B02
- Issued
- Aug 20, 2021
- Penalty
- Initial $1,755 · Current $1,755
General-duty citation text
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide: Residential Construction Site: On or about April 7, 2021, and at times prior thereto, employees were exposed to a fall hazard, while framing from a job-made supported scaffold that was not fully planked.
Recent events (1)
- — Z (S) $1755
1926.451 F07
- Issued
- Aug 20, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration: Residential Construction Site: On or about April 7, 2021, and at times prior thereto, employees were exposed to a fall hazard, while framing from a job-made supported scaffold that was not erected by a competent person.
Recent events (1)
- — Z (S) $0
1926.1053 B13
- Issued
- Aug 20, 2021
- Penalty
- Initial $1,755 · Current $1,755
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: Residential Construction Site: On or about April 7, 2021, and at times prior thereto, employees were exposed to a fall hazard while standing on the top and top step of a Louisville 6 ft. Step Ladder.
Recent events (1)
- — Z (S) $1755
1926.102 A02
- Issued
- Aug 20, 2021
- Abate by
- Sep 1, 2021
- Penalty
- Initial $4,681 · Current $4,681
General-duty citation text
29 CFR 1926.102(a)(2): The employer did not ensure that each affected employee used eye protection that provided side protection when there is a hazard from flying objects. Residential Construction Site: On or about April 7, 2021 and at times prior thereto, employees were exposed to a struck-by flying projectile hazard, while using Makita Circular Saws, Pneumatic Nail Guns, and a Metal Hammer without safety glasses. Miguel Martinez was previously cited for a violation of this occupational safety and health standard or its equivalent standard (name previously cited standard), which was contained in OSHA inspection number #1346261 citation number 1, item number Item 3b, and was affirmed as a final order on 12-31-2018, with respect to a workplace located at 3027 Rio Samba, San Antonio, TX 78258.
Recent events (1)
- — Z (R) $4681
More inspections at Miguel Martinez
View Miguel Martinez's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345237440.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.