Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONSTRUCTION SERVICES, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CONSTRUCTION SERVICES, INC. in 3002 SEXTON ROAD, DECATUR, AL 35603 (NAICS 332323). OSHA activity number 345240238.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Construction Services, INC. — free Get an email when a new federal OSHA severe-injury report for Construction Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3002 SEXTON ROAD
City
DECATUR
State
AL
ZIP
35603
Mailing
1111 CEDAR LAKE ROAD SE, DECATUR, AL 35603
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332323
Employees
28
Ownership type
A

4 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2021
Penalty
Initial $4,642 · Current $3,017 Reduced
29 CFR  1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (a) On or about April 5, 2021 - Cincinnati shear, employees were exposed to struck-by hazards when there was no energy control program, no written machine specific energy control procedures, no annual written procedure review, and no training related to the energy control procedures for authorized or affected employees.
Recent events (2)
  • — I (S) $3017.3
  • — Z (S) $4642

1910.212 A03 II

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2021
Penalty
Initial $4,642 · Current $3,017 Reduced
29 CFR  1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  (a) On or about April 5, 2021 - Cincinnati shear, employees were exposed to amputation hazards when employees could reach the side and back of the shear while the shear was cycling.
Recent events (2)
  • — I (S) $3017.3
  • — Z (S) $4642

1910.212 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Sep 10, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) On or about April 5, 2021 - Cincinnati shear, employees were exposed to struck-by hazards when the shear's awareness barrier was missing a piece of tubing on the right end of the shear where the second operator would be working when shearing parts that require two operators for the material.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 C04 I

Serious Gravity 1 1 instance 2 exposed
Issued
Sep 10, 2021
Penalty
Initial $3,481 · Current $2,263 Reduced
29 CFR  1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  (a) On or about April 5, 2021 - Cincinnati shear, employees were exposed to caught-by hazards when the unguarded projecting shaft ends did not present a smooth edge.
Recent events (2)
  • — I (S) $2262.65
  • — Z (S) $3481

View Construction Services, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345240238.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.