Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ANTOLIN ALABAMA, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ANTOLIN ALABAMA, LLC in 6801 JEFFERSON METRO PARKWAY, MC CALLA, AL 35111 (NAICS 336390). OSHA activity number 345266001.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Antolin Alabama, LLC — free Get an email when a new federal OSHA severe-injury report for Antolin Alabama, LLC is published. One employer, no account, unsubscribe in one click.
Site address
6801 JEFFERSON METRO PARKWAY
City
MC CALLA
State
AL
ZIP
35111
Mailing
6801 JEFFERSON METRO PARKWAY ATTN: AMANDA LAWLEY, MC CALLA, AL 35111
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336390
Employees
275
Ownership type
A

4 citations on file for this inspection.

1910.178 M01

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Oct 7, 2021
Abate by
Oct 27, 2021
Penalty
Initial $13,653 · Current $0 Reduced
29 CFR 1910.178(m)(1): Trucks shall not be driven up to anyone standing in front of a bench or other fixed object:  (a) On or about 04/13/2021 - Production Side Panel Sequencing Area, employees were exposed to struck-by hazards when Powered Industrial Operators deliver empty automotive side panel bins to the sequencing area.
Recent events (2)
  • — I (S) $0
  • — Z (S) $13653

1910.178 N04

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 7, 2021
Abate by
Dec 3, 2021
Penalty
Initial $13,653 · Current $10,000 Reduced
29 CFR 1910.178(n)(4): The driver shall be required to slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver shall be required to travel with the load trailing:  (a) On or about 04/13/2021 - Production Side Panel Sequencing Area, employees were exposed to struck-by hazards from forklifts carrying loaded and/or empty bins with the forks and load facing forward which obstructs the operators view of the path of travel.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $13653

1910.178 N15

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 7, 2021
Abate by
Dec 3, 2021
Penalty
Initial $13,653 · Current $10,000 Reduced
29 CFR 1910.178(n)(15): While negotiating turns, speed shall be reduced to a safe level by means of turning the hand steering wheel in a smooth, sweeping motion. Except when maneuvering at a very low speed, the hand steering wheel shall be turned at a moderate, even rate:  (a) On or about 04/13/2021 - Production Side Panel Sequencing Area,  employees were exposed to struck-by hazards from forklifts when operators failed to reduce speeds when negotiating turns.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $13653

1910.176 A

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 7, 2021
Abate by
Dec 3, 2021
Penalty
Initial $13,653 · Current $10,000 Reduced
29 CFR  1910.176(a): Where mechanical handling equipment was used, sufficient safe clearances was not allowed for aisles, at loading docks, through doorways and wherever turns or passage were made. Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways were not appropriately marked:   (a) On or about 04/13/2021 - Production Side Panel Sequencing Area, employees were exposed to struck-by hazards when forklifts were  operated adjacent to each other in a tight area and sufficient safe clearances were not provided.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $13653

View Antolin Alabama, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345266001.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.