OSHA Inspection: TEMP IT GROUP, LLC

Issued

2021-06-07 00:00:00

Abate by

2021-07-12 00:00:00

Penalty

Initial $2340.00 · Current $1404.00 Reduced

General-duty citation text

29 CFR  1926.20(b)(1):The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:  Temp It Group, LLC, at the worksite located at 338 E. Bridge in Elyria, Ohio: On or about April 22, 2021, the employer did not implement a plan or safety program to identify job site hazards for employees to maintain a safe working environment.  Such a program would allow the employer to identify potential hazards such as falls during job site operations, decreasing the probability of employee injury.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2021-06-07 00:00:00

Abate by

2021-07-12 00:00:00

Penalty

Initial $5461.00 · Current $3277.00 Reduced

General-duty citation text

29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  Temp It Group, LLC, at the worksite located at 338 E. Bridge in Elyria, Ohio: On or about April 22, 2021, the employer did not ensure that employees were protected from falls of up to approximately 33 feet while performing roofing operations on a residential structure.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.