TROY, OH —
OSHA Inspection: CONAGRA BRANDS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CONAGRA BRANDS in 801 DYE MILL ROAD, TROY, OH 45373 (NAICS 311999). OSHA activity number 345282495.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONAGRA BRANDS
- Site address
- 801 DYE MILL ROAD
- City
- TROY
- State
- OH
- ZIP
- 45373
- Mailing
- 801 DYE MILL ROAD, TROY, OH 45373
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311999
- Employees
- 950
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C06 I
- Issued
- Sep 20, 2021
- Abate by
- Oct 7, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. a) On or about 04/24/2021, periodic inspections were not conducted on third shift during sanitation cleaning and quality assurance inspections for equipment such as but not limit to The Drake Collator.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.147 C07 I
- Issued
- Sep 20, 2021
- Abate by
- Oct 7, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: (A): Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the method and means necessary for energy isolation and control. a) On or about 04/24/2021, sanitation and quality assurance employees were not adequately trained as authorized employees to recognized the need to lock out the energy isolation locations for The Drake Collator during sanitation cleaning and quality assurance inspections.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.147 D
- Issued
- Sep 20, 2021
- Abate by
- Oct 7, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (d)(1) preparation for shutdown. (d)(2) turn off and shut down of the machine (d)(3) physically locate and operate the energy isolating devices in such a manner as to isolate the machine or equipment from the energy sources. (d)(4) affix lockout or tagout devices to each energy isolating device (d)(6) Prior to starting work on machines that have been locked out or tagged out, verify that isolation and deenergizing of the machine or equipment have been accomplished. a) On or about 04/24/2021, during sanitation and quality assurance inspections employees were not locking out the energy isolations sources for The Drake Collator by utilizing the specific procedures that requires (d)(1) through (d)(6) to be followed to accomplish lockout.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.212 A01
- Issued
- Sep 20, 2021
- Abate by
- Oct 7, 2021
- Penalty
- Initial $13,653 · Current $13,653
General-duty citation text
29 CFR 1910.212(a)(1):Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. a) On or about 04/24/2021 sanitation and quality assurance employees were exposed to moving parts in that guards had been removed while the equipment is running on the equipment such as but not limited to: The Drake Collator.
Recent events (2)
- — I (S) $13653
- — Z (S) $13653
More inspections at Conagra Brands
View Conagra Brands's full OSHA safety record →
More inspections in this industry (NAICS 311999)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345282495.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.