TUPELO, MS —
OSHA Inspection: B & B CONCRETE COMPANY INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of B & B CONCRETE COMPANY INC in 130 INDUSTRIAL RD N, TUPELO, MS 38801 (NAICS 327320). OSHA activity number 345283808.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B & B CONCRETE COMPANY INC
- Site address
- 130 INDUSTRIAL RD N
- City
- TUPELO
- State
- MS
- ZIP
- 38801
- Mailing
- P.O. BOX 407, TUPELO, MS 38802
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327320
- Employees
- 46
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- Aug 24, 2021
- Abate by
- Sep 16, 2021
- Penalty
- Initial $5,266 · Current $3,160 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. (a) Facility - On or about March 28, 2021 the employer had not performed periodic inspections of their energy control procedures, exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $3159.6
- — Z (S) $5266
1910.147 D03
- Issued
- Aug 24, 2021
- Abate by
- Sep 16, 2021
- Penalty
- Initial $8,778 · Current $5,267 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). (a) Ingersoll Rand Air Compressor - On or about March 28, 2021 employees did not isolate the air and electrical energy sources prior to drive belt maintenance, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $5266.8
- — Z (S) $8778
1910.147 D04 I
- Issued
- Aug 24, 2021
- Abate by
- Sep 16, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. (a) Ingersoll Rand Air Compressor - On or about March 28, 2021 employees performing maintenance did not use a lockout device to isolate the air and electrical before removing a guard, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 F02 I
- Issued
- Aug 24, 2021
- Abate by
- Sep 16, 2021
- Penalty
- Initial $8,778 · Current $5,267 Reduced
General-duty citation text
29 CFR 1910.147(f)(2)(i): Whenever outside servicing personnel are to be engaged in activities covered by the scope and application of this standard, the on-site employer and the outside employer shall inform each other of their respective lockout or tagout procedures. (a) Ingersoll Rand Air Compressor - On or about March 28, 2021 host employer and outside service employer did not inform each other of their lockout/tagout procedures, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $5266.8
- — Z (S) $8778
1910.147 F03 II
- Issued
- Aug 24, 2021
- Abate by
- Sep 16, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii): Group lockout or tagout devices were not used in accordance with procedures required by 29 CFR 1910.147(c)(4). (a) Ingersoll Rand Air Compressor - On or about March 28, 2021 employees performing maintenance did not use group lockout procedures and devices to isolate the air and electrical before removing a guard, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Aug 24, 2021
- Abate by
- Sep 16, 2021
- Penalty
- Initial $5,266 · Current $3,160 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. (a) Facility - On or about April 28, 2021 the employer had not completed an evaluation of each powered industrial truck operator's performance within the last three years, exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $3159.6
- — Z (S) $5266
More inspections at B & B Concrete Company INC
View B & B Concrete Company INC's full OSHA safety record →
More inspections in this industry (NAICS 327320)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345283808.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.