SCHAUMBURG, IL ·
OSHA Inspection: PARTNERS MANUFACTURING INC.
Programmed Other inspection · Health discipline
At a glance
On , OSHA opened a programmed Other health inspection of PARTNERS MANUFACTURING INC. in 625 LUNT AVENUE, SCHAUMBURG, IL 60193 (NAICS 332710). OSHA activity number 345304968.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PARTNERS MANUFACTURING INC.
- Site address
- 625 LUNT AVENUE
- City
- SCHAUMBURG
- State
- IL
- ZIP
- 60193
- Mailing
- 625 LUNT AVENUE, SCHAUMBURG, IL 60193
What kind of inspection was it?
- Inspection type
- Programmed Other (K)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 19
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.215 A02
- Issued
- Oct 19, 2021
- Abate by
- Oct 29, 2021
- Penalty
- Initial $4,681 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, and flange projections. (a) On or about May 13, 2021, Partners Manufacturing Inc. did not ensure that the Okamoto 6-12/14 surface grinder was guarded to cover the spindle end, nut, and flange projections. (b) On or about May 13, 2021, Partners Manufacturing Inc. did not ensure that the Ryobi 8" bench grinder was guarded to cover the the spindle end, nut, and flange projections. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with you certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $2000
- · Z (S) $4681
1910.215 A04
- Issued
- Oct 19, 2021
- Abate by
- Oct 29, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support off-hand grinding work and/or work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch: (a) On or about May 13, 2021, Partners Manufacturing Inc. did not ensure that work rests to support grinding work, were installed and adjusted on the Ryobi 8" bench grinder, located in the production area. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with you certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.215 B09
- Issued
- Oct 19, 2021
- Abate by
- Oct 29, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch. (a) On or about May 13, 2021, Partners Manufacturing Inc., did not ensure that tongue guards were installed and adjusted to one-fourth inch to support grinding work, on the Ryobi 8" bench grinder located in the production area. In accordance with 29 CFR 1903.19 (d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstration that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 332710)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345304968.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.