BIG LAKE, TX —
OSHA Inspection: BP SURFACE SOLUTIONS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BP SURFACE SOLUTIONS, LLC in SUGG-A 184 TB, BIG LAKE, TX 76932 (NAICS 213112). OSHA activity number 345312664.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BP SURFACE SOLUTIONS, LLC
- Site address
- SUGG-A 184 TB
- City
- BIG LAKE
- State
- TX
- ZIP
- 76932
- Mailing
- 4705 SOUTH CHADBOURNE ST, SAN ANGELO, TX 76904
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213112
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 17, 2021
- Abate by
- Oct 18, 2021
- Penalty
- Initial $9,557 · Current $0 Reduced
General-duty citation text
29 CFR OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were not protected from explosion hazards. On or about May 13, 2021 employees performing maintenance on a horizontal oil tank were exposed to explosion hazards.
Recent events (3)
- — F (S) $0
- — C (S) $9557
- — Z (S) $9557
1910.147 F03 II D
- Issued
- Sep 17, 2021
- Abate by
- Oct 18, 2021
- Penalty
- Initial $6,827 · Current $6,827
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: On or about May 13, 2021, employees performing maintenance on a horizontal oil tank were exposed to explosion hazards due to not using personal lockout or tagout devices to the group lockout device.
Recent events (3)
- — F (S) $6827
- — C (S) $6827
- — Z (S) $6827
1910.147 C05 II D
- Issued
- Sep 17, 2021
- Abate by
- Oct 18, 2021
- Penalty
- Initial $767 · Current $767
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(D):Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s): On or about May 13, 2021, employees performing maintenance on a horizontal oil tank were exposed to explosion hazards due to tagout devices not indicating the identity of the employee applying the device.
Recent events (3)
- — F (O) $767
- — C (O) $767
- — Z (O) $767
1910.147 C05 III
- Issued
- Sep 17, 2021
- Abate by
- Oct 18, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(iii): Tagout devices utilized did not warn against hazardous conditions if the machine or equipment was energized: On or about May 13, 2021 employees performing maintenance on a horizontal oil tank were exposed to explosion hazards due to tagout devices not warning against hazardous conditions.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 213112)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345312664.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.