OSHA Inspection: J.M. QUALITY CONSTRUCTION LLC

Issued

Dec 6, 2021

Abate by

Jan 10, 2022

Penalty

Initial $329 · Current $329

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   J.M. Quality Construction LLC, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date 01                                         01                                           06/02/2021 01                                         02a                                         06/02/2021 01                                         02b                                         06/02/2021 01                                         03                                            06/29/2021   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

May 26, 2021

Abate by

Jun 2, 2021

Penalty

Initial $2,341 · Current $2,341

General-duty citation text

29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:   a) On May 20, 2021, employees were not wearing protective helmets where there was a possible danger of head injury from falling objects.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

May 26, 2021

Abate by

Jun 2, 2021

Penalty

Initial $4,096 · Current $4,096

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) On May 20, 2021, employees engaged in roofing activity were not protected from fall hazards while working at an elevation up to approximately 20 feet above the ground.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

May 26, 2021

Abate by

Jun 2, 2021

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.502(d)(15): Anchorage used for attachment for personal fall arrest equipment was not capable of supporting at least 5,000 pounds (22.2 kN) per employee attached nor was it designed, installed and used as follows: As part of a complete personal fall arrest system which maintains a safety factor of at least two; and under the supervision of a qualified person:    a)  On May 20, 2021, the employer did not ensure that the anchorage used by employees as an attachment point for personal fall arrest system was capable of supporting at least 5,000 pound per employee attached to it.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

May 26, 2021

Abate by

Jun 29, 2021

Penalty

Initial $2,926 · Current $2,926

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards:   a) On or about May 20, 2021, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

May 26, 2021

Penalty

Initial $1,755 · Current $1,755

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:   a) On May 20, 2021, an extension ladder used by employees to access and egress the roof did not have its side rails extended at least 3 feet above the roof eave.   No abatement certification or documentation is required for this item.