AUSTIN, TX —
OSHA Inspection: MULTI-FRAMING INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of MULTI-FRAMING INC. in 16304 FM RD 1325, AUSTIN, TX 78728 (NAICS 238130). OSHA activity number 345336572.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MULTI-FRAMING INC.
- Site address
- 16304 FM RD 1325
- City
- AUSTIN
- State
- TX
- ZIP
- 78728
- Mailing
- 816 EAST HIGHWAY 121, SUITE 105, LEWISVILLE, TX 75057
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 A06
- Issued
- Jul 21, 2021
- Abate by
- Jul 27, 2021
- Penalty
- Initial $6,827 · Current $4,096 Reduced
General-duty citation text
29 CFR 1926.451(a)(6):Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design. On or about May 28, 2021, and at times prior thereto, two workers were unloading windows from a job-made wooden trash box supported by the forks of a Rough Terrain Truck that was not designed to support personnel. The trash box was elevated up to approximately 33 feet on the apartment building under construction, exposing the workers to a fall hazard.
Recent events (2)
- — I (S) $4096.2
- — Z (S) $6827
1926.451 C02 IV
- Issued
- Jul 21, 2021
- Abate by
- Jul 27, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(iv):Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use: On or about May 28, 2021, and at times prior thereto, two workers were unloading windows from a job-made wooden trash box supported by the forks of a Rough Terrain Truck that was not designed to support personnel. The trash box was elevated up to approximately 33 feet on the apartment building under construction, exposing the workers to a fall hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.602 C01 II
- Issued
- Jul 21, 2021
- Abate by
- Jul 27, 2021
- Penalty
- Initial $6,827 · Current $4,096 Reduced
General-duty citation text
29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval: On or about May 28, 2021, and at times prior thereto, two workers were unloading windows from a job-made wooden trash box that was supported by the forks of a Rough Terrain Truck without being approved by the manufacturer. The trash box was elevated up to approximately 33 feet high of the apartment building under construction, exposing workers to a fall hazard.
Recent events (2)
- — I (S) $4096.2
- — Z (S) $6827
1926.602 D
- Issued
- Jul 21, 2021
- Abate by
- Aug 16, 2021
- Penalty
- Initial $5,461 · Current $3,277 Reduced
General-duty citation text
29 CFR 1926.602(d): Powered industrial truck operator training. Note: The requirements applicable to construction work under this paragraph are identical to those set forth at 1910.178(l) of this chapter. 29 CFR 1910.178(l)(1)(ii) Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer did not ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). On or about May 28, 2021, and at times prior thereto, the employer did not ensure that the operators of the Rough Terrain Truck were trained in the safe operations of the forklift, exposing workers to hazards such as, but not limited to being struck by moving objects, struck by falling loads and crushed by forklift tipping.
Recent events (2)
- — I (S) $3276.6
- — Z (S) $5461
1926.501 B13
- Issued
- Jul 21, 2021
- Abate by
- Aug 2, 2021
- Penalty
- Initial $4,096 · Current $2,458 Reduced
General-duty citation text
29 CFR 1926.501(b)(13):Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502. On or about May 28, 2021, two workers were unloading windows from a job-made, wooden trash box up to approximately 11 feet high at the apartment complex under construction without the use of fall protection, exposing workers to a fall hazard.
Recent events (2)
- — I (S) $2457.6
- — Z (S) $4096
More inspections at Multi-Framing INC.
View Multi-Framing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345336572.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.