ORANGE PARK, FL —
OSHA Inspection: NSH DESIGN GROUP, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of NSH DESIGN GROUP, INC. in 2410 LUCY BRANCH AVENUE SUITE A, ORANGE PARK, FL 32073 (NAICS 337110). OSHA activity number 345341739.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NSH DESIGN GROUP, INC.
- Site address
- 2410 LUCY BRANCH AVENUE SUITE A
- City
- ORANGE PARK
- State
- FL
- ZIP
- 32073
- Mailing
- 2410 LUCY BRANCH AVENUE SUITE A, ORANGE PARK, FL 32073
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 25
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.1053 C
- Issued
- Oct 15, 2021
- Abate by
- Jan 28, 2022
- Penalty
- Initial $3,901 · Current $2,341 Reduced
9000
General-duty citation text
29 CFR 1910.1053(c): The employer did not ensure that no employee was exposed to an airborne concentration of respirable crystalline silica in excess of 50 �g/m3, calculated as an 8-hour TWA: a. A Fabrication Technician cutting, grinding, and sanding granite countertops was exposed to Respirable Crystalline Silica at a Time Weighted Average (TWA) of 90.2 micrograms per cubic meter (�g/m3), 1.8 times the permissible exposure limit of 50.0 �g/m3. The sampling was performed for 265 minutes on 06/04/2021.
Recent events (2)
- — I (S) $2340.6
- — Z (S) $3901
1910.1053 F01
- Issued
- Oct 15, 2021
- Abate by
- Jan 28, 2022
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1053(f)(1): The employer did not use engineering and work practice controls to reduce and maintain employee exposure to respirable crystalline silica to or below the PEL, unless the employer can demonstrate that such controls are not feasible: a. A Fabrication Technician cutting, grinding, and sanding granite countertops was exposed to Respirable Crystalline Silica at a Time Weighted Average (TWA) of 90.2 micrograms per cubic meter (�g/m3), 1.8 times the permissible exposure limit of 50.0 �g/m3. The sampling was performed for 265 minutes on 06/04/2021. The employer failed to implement effective engineering or work practice control methods for this task.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1053 G02
- Issued
- Oct 15, 2021
- Abate by
- Jan 28, 2022
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
Where respirator use was required by this section, the employer did not institute a respiratory protection program in accordance with 29 CFR 1910.134: a. A Fabrication Technician cutting, grinding, and sanding granite countertops was exposed to Respirable Crystalline Silica at a Time Weighted Average (TWA) of 90.2 micrograms per cubic meter (�g/m3), 1.8 times the permissible exposure limit of 50.0 �g/m3. The sampling was performed for 265 minutes on 06/04/2021. The employer did not develop and institute a respiratory protection program.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1053 D01
- Issued
- Oct 15, 2021
- Penalty
- Initial $2,340 · Current $1,404 Reduced
9000
General-duty citation text
29 CFR 1910.1053(d)(1): Exposure assessment-(1) General. The employer shall assess the exposure of each employee who is or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section. a. Granite Countertop Fabrication Shop: On or about 06/04/2021 and at times prior, the employer exposed employees to respirable crystalline silica, in that initial exposure monitoring was not performed during granite cutting, grinding, and sanding operations.
Recent events (2)
- — I (S) $1404
- — Z (S) $2340
1910.1053 E01
- Issued
- Oct 15, 2021
- Abate by
- Jan 28, 2022
- Penalty
- Initial $2,340 · Current $1,404 Reduced
9000
General-duty citation text
29 CFR 1910.1053(e)(1):The employer did not establish a regulated area wherever an employee's exposure to airborne concentrations of respirable crystalline silica was, or could have been reasonably expected to be, in excess of the PEL: a. A Fabrication Technician cutting, grinding, and sanding granite countertops was exposed to Respirable Crystalline Silica at a Time Weighted Average (TWA) of 90.2 micrograms per cubic meter (�g/m3), 1.8 times the permissible exposure limit of 50.0 �g/m3. The sampling was performed for 265 minutes on 06/04/2021. The employer did not establish a regulated area.
Recent events (2)
- — I (S) $1404
- — Z (S) $2340
1910.1053 F02 I
- Issued
- Oct 15, 2021
- Abate by
- Jan 28, 2022
- Penalty
- Initial $438 · Current $263 Reduced
9000
General-duty citation text
29 CFR 1910.1053(f)(2)(i): The employer did not establish and implement a written exposure control plan: a. Granite Countertop Fabrication Shop: On or about 06/04/2021 and at times prior, the employer exposed employees to respirable crystalline silica above the Permissible Exposure Limit, in that the employer had not established and implemented a written silica exposure control plan for employees during granite cutting, grinding, and sanding operations.
Recent events (2)
- — I (O) $262.8
- — Z (O) $438
1910.1053 I01 I
- Issued
- Oct 15, 2021
- Abate by
- Jan 28, 2022
- Penalty
- Initial $438 · Current $263 Reduced
9000
General-duty citation text
29 CFR 1910.1053(i)(1)(i):The employer did not make medical surveillance available for all employees who were or could be occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year: a. A Fabrication Technician cutting, grinding, and sanding granite countertops was exposed to Respirable Crystalline Silica at a Time Weighted Average (TWA) of 90.2 micrograms per cubic meter (�g/m3), 1.8 times the permissible exposure limit of 50.0 �g/m3. The sampling was performed for 265 minutes on 06/04/2021. The employer did not make medical surveillance available to employees exposed to respirable crystalline silica over the permissible exposure limit.
Recent events (2)
- — I (O) $262.8
- — Z (O) $438
More inspections at NSH Design Group, INC.
View NSH Design Group, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345341739.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.