OSHA Inspection: DZ FRANCO CONSTRUCTION, LLC

Issued

Nov 24, 2021

Abate by

Dec 9, 2021

Penalty

Initial $438 · Current $438

General-duty citation text

29 CFR  1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:

Issued

Jun 30, 2021

Abate by

Jul 27, 2021

Penalty

Initial $3,121 · Current $3,121

General-duty citation text

29 CFR  1926.102(a)(1):  The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a) At the jobsite, an employee was exposed to struck-by hazards while operating a nail gun without wearing eye protection.

Issued

Jun 30, 2021

Abate by

Jul 27, 2021

Penalty

Initial $3,901 · Current $3,901

General-duty citation text

29 CFR  1926.501(b)(13):  Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system:  a)  At the jobsite, employees were exposed to a fall hazard of approximately 10-feet 2-inches and greater while working on a  roof without using fall protection.

Issued

Jun 30, 2021

Abate by

Jul 27, 2021

Penalty

Initial $3,901 · Current $3,901

General-duty citation text

29 CFR  1926.1053(b)(1):  Where portable ladders were used for access to an upper landing surface and the ladder's length allowed, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a) At the jobsite, employees were exposed to a fall hazard of approximately 10-feet 2-inches and greater while using a Werner 24-foot aluminum extension ladder that was not raised at least three feet above the roof landing.

Issued

Jun 30, 2021

Abate by

Jul 27, 2021

Penalty

Initial $3,901 · Current $3,901

General-duty citation text

29 CFR  1926.1053(b)(5)(i): Non-self-supporting ladder(s) were not used at an angle such that the horizontal distance from the top support to the foot of the ladder was approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support):  a) At the jobsite, employees were exposed to a fall hazard of approximately 10-feet 2-inches while using a ladder at an incorrect angle.