MESQUITE, TX —
OSHA Inspection: MANUAL CORREA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MANUAL CORREA in 125 E. GRUBB DRIVE, MESQUITE, TX 75150 (NAICS 238140). OSHA activity number 345369144.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MANUAL CORREA
- Site address
- 125 E. GRUBB DRIVE
- City
- MESQUITE
- State
- TX
- ZIP
- 75150
- Mailing
- 8721 GROVEN CREST DRIVE, DALLAS, TX 75217
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 I
- Issued
- Jul 26, 2021
- Abate by
- Aug 19, 2021
- Penalty
- Initial $4,096 · Current $4,096
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) On or about June 17, 2021, where employees operated powered industrial trucks without having first completed training consisting of formal instruction, practical training, and an evaluation of the operators performance in the workplace.
Recent events (2)
- — I (S) $4096
- — Z (S) $4096
1926.451 B01
- Issued
- Jul 26, 2021
- Abate by
- Aug 19, 2021
- Penalty
- Initial $4,096 · Current $4,096
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds were not fully planked or decked between the front uprights and the guardrail supports as follows: a) On or about June 17, 2021, at the new commercial construction site, employees were exposed to fall hazards of more than 10-feet above the ground level below while working from a tubular welded frame scaffold that was not fully planked.
Recent events (2)
- — I (S) $4096
- — Z (S) $4096
1926.451 C03
- Issued
- Jul 26, 2021
- Abate by
- Aug 19, 2021
- Penalty
- Initial $4,096 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(c)(3): Supported scaffold poles, legs, posts, frames, and uprights were not plumb and braced to prevent swaying and displacement: a) On or about June 17, 2021 at the new commercial construction site, employees were exposed to struck-by and/or crushed-by hazards while working from a four tier tubular welded frame scaffold that was not equipped with cross-bracing to prevent collapse and/or displacement.
Recent events (2)
- — I (S) $0
- — Z (S) $4096
1926.451 E01
- Issued
- Jul 26, 2021
- Abate by
- Aug 19, 2021
- Penalty
- Initial $4,096 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface were not used: a) On or about June 17, 2021, at the new commercial construction site, employees were exposed to fall hazards while ascending / descending a tubular welded frame scaffold without the use of a ladder.
Recent events (2)
- — I (S) $0
- — Z (S) $4096
1926.451 G04 I
- Issued
- Jul 26, 2021
- Abate by
- Aug 19, 2021
- Penalty
- Initial $4,096 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms. Guardrail systems were not installed before the scaffold is released for use by employees other than erection/dismantling crews: a) On or about June 17, 2021, at the new commercial construction site, employees were exposed to fall hazards of more than 10-feet while working from a tubular welded frame scaffold that was not equipped with a guardrail system or personal fall arrest system.
Recent events (2)
- — I (S) $0
- — Z (S) $4096
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345369144.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.