SAN ANTONIO, TX —
OSHA Inspection: ALAMO BARBER & BEAUTY SUPPLY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ALAMO BARBER & BEAUTY SUPPLY in 6301 BROADWAY, SAN ANTONIO, TX 78209 (NAICS 423850). OSHA activity number 345386783.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALAMO BARBER & BEAUTY SUPPLY
- Site address
- 6301 BROADWAY
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78209
- Mailing
- 6301 BROADWAY, SAN ANTONIO, TX 78209
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423850
- Employees
- 5
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.242 B
- Issued
- Dec 15, 2021
- Penalty
- Initial $2,341 · Current $1,405 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Barber Shop Station #1 : On or about June 24, 2021, and at times prior thereto, employees were exposed to a physical hazard when operating a compressed air blow gun to clean the body, where the tip pressure was not reduced to below 30 p.s.i. b) Barber Shop Station #2: On or about June 24, 2021, and at times prior thereto, employees were exposed to a physical hazard when operating a compressed air blow gun to clean the body, where the tip pressure was not reduced to below 30 p.s.i.
Recent events (2)
- — I (S) $1404.6
- — Z (S) $2341
1910.303 F02
- Issued
- Dec 15, 2021
- Penalty
- Initial $2,341 · Current $1,405 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: Storage Room, between office and shop: On or about June 24, 2021, and at times prior thereto, the employer did not properly identify the circuit breakers to be disconnected for equipment in an electrical panel in the event of an electrical emergency.
Recent events (2)
- — I (S) $1404.6
- — Z (S) $2341
1910.303 G01 I
- Issued
- Dec 15, 2021
- Penalty
- Initial $1,755 · Current $1,053 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i): The dimension of the working space in the direction of access to live parts operating at 600 volts or less and likely to require examination, adjustment, servicing, or maintenance while alive was less than indicated in Table S1: Storage Room, between office and shop: On or about June 24, 2021, and at times prior thereto, employees were exposed to an electrical panel that was obstructed by equipment and materials, which did not have a minimum of 3 feet of clearance in the event of an electrical emergency.
Recent events (2)
- — I (S) $1053
- — Z (S) $1755
1910.305 B01 II
- Issued
- Dec 15, 2021
- Penalty
- Initial $2,341 · Current $1,405 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Storage Room, between office and shop: On or about June 16, 2021, and at times prior thereto, employees were exposed to an electrical hazard while working near the circuit breaker panel, where this panel had two missing breakers at location ABBS. b) Storage Room, between office and shop: On or about June 16, 2021, and at times prior thereto, employees were exposed to an electrical hazard while working near the circuit breaker panel, where this panel had one missing breaker at location CH-9.
Recent events (2)
- — I (S) $1404.6
- — Z (S) $2341
1910.305 B02 I
- Issued
- Dec 15, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) Storage Room, between office and shop: On or about June 16, 2021, and at times prior thereto, employees were exposed to an electrical hazard while working near the circuit breaker panel, where this panel had one missing cover. a) Storage Room, between office and shop: On or about June 16, 2021, and at times prior thereto, employees were exposed to an electrical hazard from a receptacle that did not have a faceplate.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV B
- Issued
- Dec 15, 2021
- Abate by
- Jan 4, 2022
- Penalty
- Initial $3,511 · Current $2,107 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables may not be used where run through holes in walls, ceilings or floors: Backside of Beauty Salon: On or about June 24, 2021, and at times prior thereto, employees were exposed to an electrical hazard while using a flexible cord that was running through the floor on the inside to the exterior of the building.
Recent events (2)
- — I (S) $2106.6
- — Z (S) $3511
1910.334 A02 I
- Issued
- Dec 15, 2021
- Penalty
- Initial $2,341 · Current $1,405 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): Counter Area: On or about June 16, 2021, and at times prior thereto, an employee was exposed to an electrical hazard while working with an extension cord that had strain relief damage at the plug.
Recent events (2)
- — I (S) $1404.6
- — Z (S) $2341
More inspections in this industry (NAICS 423850)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345386783.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.