MONROE, WI —
OSHA Inspection: ORCHID MONROE, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ORCHID MONROE, LLC in 350 21ST STREET, MONROE, WI 53566 (NAICS 332119). OSHA activity number 345397111.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ORCHID MONROE, LLC
- Site address
- 350 21ST STREET
- City
- MONROE
- State
- WI
- ZIP
- 53566
- Mailing
- 350 21ST STREET, MONROE, WI 53566
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.28 B01 I
- Issued
- Oct 26, 2021
- Abate by
- Nov 9, 2021
- Penalty
- Initial $9,557 · Current $5,120 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i): On or about June 30, 2021, the employer did not ensure that employees on a walking-working surface with an unprotected side or edge that is 4 feet or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i) while working from Positioners in the Progress Rail Area.
Recent events (2)
- — I (S) $5120
- — Z (S) $9557
1910.36 E02
- Issued
- Oct 26, 2021
- Abate by
- Nov 9, 2021
- Penalty
- Initial $6,827 · Current $5,120 Reduced
General-duty citation text
29 CFR 1910.36(e)(2):The door(s) that connected any room to an exit route did not swing out in the direction of exit travel when the room was designed to be occupied by more than 50 people or when the room was a high hazard area. On or about June 30, 2021, the door(s) that connected the Powder Room to an exit route did not swing out in the direction of exit travel when the room was a high hazard area.
Recent events (2)
- — I (S) $5120
- — Z (S) $6827
1910.212 A01
- Issued
- Oct 26, 2021
- Abate by
- Nov 9, 2021
- Penalty
- Initial $9,557 · Current $5,120 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about June 30, 2021, one or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by ingoing nip points while operating the O.D. Cleaning Station in the Powder Coat Room.
Recent events (2)
- — I (S) $5120
- — Z (S) $9557
1910.219 C04 I
- Issued
- Oct 26, 2021
- Abate by
- Nov 9, 2021
- Penalty
- Initial $9,557 · Current $5,120 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i):Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: On or about June 30, 2021, Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft while testing motors in the Carter Motor Area.
Recent events (2)
- — I (S) $5120
- — Z (S) $9557
1910.184 E01
- Issued
- Oct 26, 2021
- Abate by
- Nov 17, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(e)(1):Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: On or about June 30, 2021, an alloy steel sling in the Progress Rail Area did not have permanently affixed durable identification stating size, grade, rated capacity, and reach.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Orchid Monroe, LLC
View Orchid Monroe, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332119)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345397111.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.