MOUNT LAUREL, NJ —
OSHA Inspection: REPUBLIC SERVICES OF NEW JERSEY, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of REPUBLIC SERVICES OF NEW JERSEY, LLC in 4100 CHURCH ROAD, MOUNT LAUREL, NJ 08054 (NAICS 562111). OSHA activity number 345407340.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REPUBLIC SERVICES OF NEW JERSEY, LLC
- Site address
- 4100 CHURCH ROAD
- City
- MOUNT LAUREL
- State
- NJ
- ZIP
- 08054
- Mailing
- 4100 CHURCH ROAD, MOUNT LAUREL, NJ 08054
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562111
- Employees
- 142
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A04
- Issued
- Oct 26, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $9,753 · Current $9,753
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) Front/Maintenance bays: On or about 7/8/2021, work rests on the Jet 10" Shop Bench Grinder (Model number: JGB-10A, Serial Number: 18040250) were measured at 1.125 inches from the grinding wheel. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (O) $9753
- — Z (S) $9753
1910.215 B09
- Issued
- Oct 26, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $9,753 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Front/Maintenance bays: On or about 7/8/2021, a tongue guard on the Jet 10" Shop Bench Grinder (Model number: JGB-10A, Serial Number: 18040250) was missing from the grinding wheel creating an opening of more than 1/4 inch. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (S) $9753
1910.252 B02 III
- Issued
- Oct 26, 2021
- Penalty
- Initial $7,802 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii):Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: a) Front/Maintenance Bay and Back/Welding Bay: On or about 7/8/2021, welding screens were not available or utilized to protect employees adjacent to the welding area when welding was performed.
Recent events (2)
- — I (S) $1000
- — Z (S) $7802
1910.157 C01
- Issued
- Oct 26, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $5,851 · Current $3,875 Reduced
General-duty citation text
29 CFR 1910.157(c)(1):Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: a) Back Maintenance bay: On or about 7/8/2021, fire extinguishers by the back door were not mounted. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (O) $3875
- — Z (S) $5851
1910.157 E03
- Issued
- Oct 26, 2021
- Penalty
- Initial $5,851 · Current $0 Reduced
General-duty citation text
29 CFR 1910.157(e)(3):Portable fire extinguishers were not subjected to an annual maintenance check: a) Front/Maintenance Bay and Back/Welding Bay: On or about 7/8/2021, fire extinguishers were observed to be past due for the annual maintenance check.
Recent events (2)
- — I (O) $0
- — Z (S) $5851
More inspections at Republic Services of NEW Jersey, LLC
View Republic Services of NEW Jersey, LLC's full OSHA safety record →
More inspections in this industry (NAICS 562111)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345407340.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.