Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: VICTOR CHAVEZ PALMA

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of VICTOR CHAVEZ PALMA in 706 VISTA BELLA DRIVE, GALVESTON, TX 77551 (NAICS 238170). OSHA activity number 345419279.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Victor Chavez Palma — free Get an email when a new federal OSHA severe-injury report for Victor Chavez Palma is published. One employer, no account, unsubscribe in one click.
Establishment
VICTOR CHAVEZ PALMA
Site address
706 VISTA BELLA DRIVE
City
GALVESTON
State
TX
ZIP
77551
Mailing
15547 SCENIC HAVEN, HOUSTON, TX 77083
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238170
Employees
2
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 19, 2021
Abate by
Sep 15, 2021
Penalty
Initial $1,755 · Current $1,071 Reduced
29 CFR  1926.102(a)(1):  Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) At the jobsite, an employee was exposed to struck-by hazards while operating a DeWalt DWE575 circular saw without wearing eye protection.
Recent events (2)
  • — I (S) $1071
  • — Z (S) $1755

1926.300 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 19, 2021
Abate by
Sep 15, 2021
Penalty
Initial $2,341 · Current $1,395 Reduced
29 CFR  1926.300(b)(1):  Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  a) At the jobsite, an employee was exposed to amputation hazards when he operated a DeWalt DWE575 circular saw with a piece of wood wedged between the blade guard and the saw blade to prevent the blade guard from actuating.
Recent events (2)
  • — I (S) $1395
  • — Z (S) $2341

1926.1053 B04

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 19, 2021
Penalty
Initial $2,341 · Current $1,395 Reduced
29 CFR  1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:  a) At the jobsite,  on or about July 14, 2021, an employee was exposed to a fall hazard when he worked from an unopened Werner 6-foot fiberglass a-frame ladder that was leaned against the wall of a house.
Recent events (2)
  • — I (S) $1395
  • — Z (S) $2341

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Aug 19, 2021
Penalty
Initial $2,926 · Current $1,755 Reduced
29 CFR  1904.39(a)(2):  The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.  a) On or about July 14, 2021, the employer failed to report to OSHA an injury resulting in an in-patient hospitalization.
Recent events (2)
  • — I (O) $1755
  • — Z (O) $2926

1926.405 G02 IV

Other-than-serious 1 instance 1 exposed
Issued
Aug 19, 2021
Abate by
Sep 15, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.405(g)(2)(iv):  Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  a) At the jobsite, an employee was exposed to electric shock hazards while operating a 120-volt, 15-amp, DeWalt DWE575 circular saw connected to a flexible extension cord that had strain relief damage.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Victor Chavez Palma's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345419279.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.