Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CRESTWOOD JEWELERS JACKSON

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of CRESTWOOD JEWELERS JACKSON in 2275 WEST COUNTY LINE ROAD, JACKSON, NJ 08527 (NAICS 448310). OSHA activity number 345427272.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Crestwood Jewelers Jackson — free Get an email when a new federal OSHA severe-injury report for Crestwood Jewelers Jackson is published. One employer, no account, unsubscribe in one click.
Site address
2275 WEST COUNTY LINE ROAD
City
JACKSON
State
NJ
ZIP
08527
Mailing
2275 WEST COUNTY LINE ROAD, JACKSON, NJ 08527
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
448310
Employees
3
Ownership type
A

6 citations on file for this inspection.

1910.212 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Jan 18, 2022
Abate by
Mar 11, 2022
Penalty
Initial $4,351 · Current $2,182 Reduced
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts, ingoing nip points and flying fragments:  (a) Facility: The Black & Decker 6 inch bench grinder, serial number 9051, was not provided with guarding to protect the operator form rotating shafts and on each side of the machine used to hold buffing wheels on or about 7/20/2021.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $2182
  • — Z (S) $4351

1910.305 A02 IX

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 18, 2022
Abate by
Feb 11, 2022
Penalty
Initial $1,865 · Current $932 Reduced
29 CFR 1910.305(a)(2)(ix): All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard:   a) Facility:  Lights located over the buffing wheels on the Black & Decker 6" Bench Grinder serial number 9051 were not provided with a guard to protect them from accidental contact or breakage, observed on or about 7/20/2021.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
  • — I (S) $932
  • — Z (S) $1865

1910.305 G01 IV A

Serious Gravity 1 4 instances 2 exposed
Issued
Jan 18, 2022
Abate by
Mar 11, 2022
Penalty
Initial $1,865 · Current $932 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure.   a) Facility: A T155 Power strip was plugged into an electrical receptacle and was used to power two 60 watt light bulbs, a Black & Decker bench grinder, and a 5387 -MUD downdraft dust collection system  on or about 7/20/2021.   b) Facility: A Enercel E89769 Power strip was plugged into an electrical receptacle and was used to power a Ultrasonic Quantrex 90H  and a Procraft 9 Electroplate 45510G on or about 7/20/2021.   c) Facility: A Radio Shack model 61-2141 Power strip was plugged into an electrical receptacle and was used to power a crock pot, 2 hand piece solders, and overhead lamp on or about 7/20/2021.   d) Facility: A 0425 model Power strip was plugged into an electrical receptacle and was used to power a  Sherwood RX41031 radio, a toaster over, hand piece solder, and a Holmes ceramic mini heater on or about 7/20/2021.    NOTE:  THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
  • — I (S) $932
  • — Z (S) $1865

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 18, 2022
Abate by
Mar 11, 2022
Penalty
Initial $3,108 · Current $1,554 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which described how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) would be met:  a)   Throughout facility: The employer did not develop and implement a written hazard communication program for the chemicals used by employees, such as, but not limited to, Cohler Superbrite Rhodium Plating Solutions on or about 7/20/2021.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1554
  • — Z (S) $3108

1910.1200 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 18, 2022
Abate by
Mar 11, 2022
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they used:   a) Facility: The Employer did not have Safety data sheet(s) for chemicals used by employees such as, but not limited to, Cohler Superbrite Rhodium Plating Solutions  on or about 7/20/2021.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 18, 2022
Abate by
Mar 11, 2022
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) Facility: The employer did not provide effective information and training to employees for the chemicals used in the work area, such as, but not limited to, Cohler Superbrite Rhodium Plating Solutions on or about 7/20/2021.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345427272.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.