AUBURN, AL —
OSHA Inspection: 2A USA, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of 2A USA, INC. in 2410 W TECH LN, AUBURN, AL 36832 (NAICS 331524). OSHA activity number 345436695.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 2A USA, INC.
- Site address
- 2410 W TECH LN
- City
- AUBURN
- State
- AL
- ZIP
- 36832
- Mailing
- 2410 W TECH LN, AUBURN, AL 36832
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331524
- Employees
- 87
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 C11
- Issued
- Oct 25, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $4,642 · Current $2,667 Reduced
General-duty citation text
29 CFR 1910.23(c)(11): The employer did not ensure that portable ladders used to gain access to an upper landing surface that have side rails that extend at least 3 feet (0.9 m) above the upper landing surface. a) Ladder on roof mezzanine; On or about July 22, 2021 and at times prior to the employer exposed employees to fall hazards of 10 feet in that the employer allowed employees to utilize a portable ladder located between the roof upper and lower mezzanine areas without the ladder extending at least three feet above the upper landing surface.
Recent events (2)
- — I (S) $2667
- — Z (S) $4642
1910.147 C04 I
- Issued
- Oct 25, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $4,642 · Current $2,667 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) CNC area, M118; On or about July 22, 2021 and at times prior to the employer exposed employees to laceration hazards in that employees were allowed to conduct servicing and maintenance on the M118 CNC machine without utilizing specific energy control procedures.
Recent events (2)
- — I (S) $2667
- — Z (S) $4642
1910.212 A01
- Issued
- Oct 25, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $4,642 · Current $2,667 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Tooling room, KLS2280-C Lathe; On or about July 22, 2021 and at times prior to the employer exposed employees to amputation hazards in that employees were allowed to operate the KLS lathe without a chuck guard.
Recent events (2)
- — I (S) $2667
- — Z (S) $4642
1910.134 C02 I
- Issued
- Oct 25, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) Tooling area; On or about July 22, 2021 and at times prior to the employer exposed employees to respiratory hazards in that the employer did not provide employees with the information contained in Appendix D before allowing the voluntary use of a tight fitting elastomeric respirators while grinding or welding.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 E01
- Issued
- Oct 25, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Tooling area; On or about July 22, 2021 and at times prior to the employer exposed employees to respiratory hazards in that the employer did not medically evaluate employees before allowing the voluntary use of a tight fitting elastomeric respirators while grinding or welding.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 331524)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345436695.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.