BRONX, NY —
OSHA Inspection: G.A.L. MANUFACTURING COMPANY, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of G.A.L. MANUFACTURING COMPANY, LLC in 50 EAST 153RD STREET, BRONX, NY 10451 (NAICS 333921). OSHA activity number 345444251.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch G.A.L. Manufacturing Company, LLC — free
Get an email when a new federal OSHA severe-injury report for G.A.L. Manufacturing Company, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- G.A.L. MANUFACTURING COMPANY, LLC
- Site address
- 50 EAST 153RD STREET
- City
- BRONX
- State
- NY
- ZIP
- 10451
- Mailing
- 50 EAST 153RD STREET, BRONX, NY 10451
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333921
- Employees
- 210
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.147 C07 I B
- Issued
- Nov 5, 2021
- Abate by
- Nov 26, 2021
- Penalty
- Initial $8,778 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: Location: 50 East 153rd St. Bronx NY 10451 - Interlock Department a) On or about July 6th, 2021, employees were exposed to electrical hazards due to no training in the purpose and use of the energy control procedure.
Recent events (3)
- — F (S) $0
- — C (S) $8778
- — Z (S) $8778
1910.147 C07 IV
- Issued
- Nov 5, 2021
- Abate by
- Nov 26, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: Location: 50 East 153rd St. Bronx NY 10451 - Interlock Department a) On or about July 6th, 2021, employees were exposed to electrical hazards due to the employer not certifying that employee training had been accomplished.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C08
- Issued
- Nov 5, 2021
- Abate by
- Nov 26, 2021
- Penalty
- Initial $5,266 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(8): Lockout or tagout was not performed only by the authorized employees who are performing the servicing or maintenance: Location: 50 East 153rd St. Bronx NY 10451 - Interlock Department a) On or about July 6th, 2021, employees were exposed to electrical hazards due to Mechanical Power Presses, Flywheel Press Serial #: 152-184, being locked out by an individual who is not an authorized employees who is performing the servicing or maintenance or an employee of the company.
Recent events (3)
- — F (S) $0
- — C (S) $5266
- — Z (S) $5266
1910.217 C01 I
- Issued
- Nov 5, 2021
- Penalty
- Initial $12,288 · Current $15,000
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): Location: 50 East 153rd St. Bronx NY 10451 - Interlock Department a) On or about July 6th, 2021, employees were exposed to caught in hazards while using a foot pedal without a usage of point of operation guards on the following machines: Mechanical Power Presses Flywheel Press Serial #: 152-184 Name: Aida 1100 Stamping Press Model: Aida Engineering LTD NC1-1 Serial Number: C0411-0417 Location: Fabrication Name: Aida 2000 Stamping Press Model: Aida Engineering LTD NC1-2 Serial Number: C0420-0450 Location: Fabrication Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen B2 Punch Press Location Interlock Serial Number: DHE60943 Name: Alva Allen Bench Punch Model: Alva Allen BT8 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location Interlock
Recent events (3)
- — F (S) $15000
- — C (S) $12288
- — Z (S) $12288
1910.217 E01 I A
- Issued
- Nov 5, 2021
- Penalty
- Initial $12,288 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i)(A): Periodic and regular inspections of each power press were not conducted to ensure that all of its parts, auxiliary equipment, and safeguards, including clutch/brake mechanism, antirepeat feature, and single-stroke mechanism, are in safe operating condition and adjustment: Location: 50 East 153rd St. Bronx NY 10451 a) On or about July 6th, 2021, employees were exposed to caught in hazards due to the employer not conducting periodic and regular inspections of each of the following power presses: Mechanical Power Presses Flywheel Press Serial #: 152-184 Name: Aida 1100 Stamping Press Model: Aida Engineering LTD NC1-1 Serial Number: C0411-0417 Location: Fabrication Name: Aida 2000 Stamping Press Model: Aida Engineering LTD NC1-2 Serial Number: C0420-0450 Location: Fabrication Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen B2 Punch Press Location Interlock Serial Number: DHE60943 Name: Alva Allen Bench Punch Model: Alva Allen BT8 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location Interlock
Recent events (3)
- — F (S) $10000
- — C (S) $12288
- — Z (S) $12288
1910.217 E01 I C
- Issued
- Nov 5, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(i)(C): The employer shall maintain a certification record of each inspection, and each maintenance and repair task performed, under the general component of the inspection program that includes the date of the inspection, maintenance, or repair work, the signature of the person who performed the inspection, maintenance, or repair work, and the serial number, or other identifier, of the power press inspected, maintained, and repaired. (A) A certification record of each inspection, and each maintenance and repair task performed was not maintained as required. Location: 50 East 153rd St. Bronx NY 10451 a) On or about July 6th, 2021, employees were exposed to caught in hazards due to the employer not maintaining a certification record of each inspection, and each maintenance and repair task performed on the following: Mechanical Power Presses Flywheel Press Serial #: 152-184 Name: Aida 1100 Stamping Press Model: Aida Engineering LTD NC1-1 Serial Number: C0411-0417 Location: Fabrication Name: Aida 2000 Stamping Press Model: Aida Engineering LTD NC1-2 Serial Number: C0420-0450 Location: Fabrication Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen B2 Punch Press Location Interlock Serial Number: DHE60943 Name: Alva Allen Bench Punch Model: Alva Allen BT8 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location Interlock
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.217 E01 II A
- Issued
- Nov 5, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(ii)(A): Inspections and tests of each press on a weekly basis were not being completed to determine the condition of the clutch/ brake mechanism, anti repeat feature and single stroke mechanism. Location: 50 East 153rd St. Bronx NY 10451 - Interlock Department a) On or about July 6th, 2021, employees were exposed to caught in hazards due to the employer not conducting weekly inspection on each of the following power presses: Mechanical Power Presses Flywheel Press Serial #: 152-184 Name: Aida 1100 Stamping Press Model: Aida Engineering LTD NC1-1 Serial Number: C0411-0417 Location: Fabrication Name: Aida 2000 Stamping Press Model: Aida Engineering LTD NC1-2 Serial Number: C0420-0450 Location: Fabrication Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen B2 Punch Press Location Interlock Serial Number: DHE60943 Name: Alva Allen Bench Punch Model: Alva Allen BT8 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location Interlock
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.217 E02
- Issued
- Nov 5, 2021
- Abate by
- Nov 26, 2021
- Penalty
- Initial $8,778 · Current $15,000
General-duty citation text
29 CFR 1910.217(e)(2): Instructions to establish new or changed guidelines for use and care of mechanical power press(es) were not furnished when mechanical power press(es) were modified: (A) A certification record of each inspection, and each maintenance and repair task performed was not maintained as required. Location: 50 East 153rd St. Bronx NY 10451 a) On or about July 6th, 2021, employees were exposed to caught in hazards due to the employer not furnishing instructions to establish new or changed guidelines for use and care of mechanical power presses when mechanical power presses were modified - the modification includes but isn't limited to the foot pedal being removed or added - for the following: Mechanical Power Presses Flywheel Press Serial #: 152-184 Name: Aida 1100 Stamping Press Model: Aida Engineering LTD NC1-1 Serial Number: C0411-0417 Location: Fabrication Name: Aida 2000 Stamping Press Model: Aida Engineering LTD NC1-2 Serial Number: C0420-0450 Location: Fabrication Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BT-5 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Operations Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen B2 Punch Press Location Interlock Serial Number: DHE60943 Name: Alva Allen Bench Punch Model: Alva Allen BT8 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location: Interlock Name: Alva Allen Bench Punch Model: Alva Allen BHS2 Punch Press Location Interlock
Recent events (3)
- — F (S) $15000
- — C (S) $8778
- — Z (S) $8778
1910.217 F02
- Issued
- Nov 5, 2021
- Penalty
- Initial $12,288 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(f)(2): Operator(s) were not trained and instructed in the safe method of work before starting work on mechanical power press(es). The employer did not insure by adequate supervision that correct operating procedures are being followed: Location: 50 East 153rd St. Bronx NY 10451 - Interlock Department a) On or about July 6th, 2021, employees were exposed to caught in hazards due to the employer not ensure by adequate supervision that correct operating procedures are being followed.
Recent events (3)
- — F (S) $0
- — C (S) $12288
- — Z (S) $12288
More inspections at G.A.L. Manufacturing Company, LLC
View G.A.L. Manufacturing Company, LLC's full OSHA safety record →
More inspections in this industry (NAICS 333921)
Jun 25, 2026
Southeast Elevator, INC. · MIAMI BEACH, FL
Jun 3, 2026
Southeast Elevator, INC. · TAMPA, FL
May 21, 2026
Pacific Coast Elevator Corporation · LOS ANGELES, CA
May 12, 2026
Inclinator Elevators & Lifts · RUMSON, NJ
Apr 10, 2026
Highride Elevator Services INC. · BROOKLYN, NY
More inspections in NY
Jul 17, 2026
Sullivan County Care Center at Sunset Lake · LIBERTY, NY
Jul 17, 2026
Vergara Electrical LLC · NEW YORK, NY
Jul 17, 2026
Apple Converting, INC. · ONEONTA, NY
Jul 17, 2026
Namicela Home Solutions INC · SYRACUSE, NY
Jul 17, 2026
Cranesville Block CO., INC. · SYRACUSE, NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345444251.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.