NEW CASTLE, DE —
OSHA Inspection: MTC LOGISTICS
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of MTC LOGISTICS in 2 DOCK VIEW DRIVE, NEW CASTLE, DE 19720 (NAICS 493120). OSHA activity number 345452056.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MTC LOGISTICS
- Site address
- 2 DOCK VIEW DRIVE
- City
- NEW CASTLE
- State
- DE
- ZIP
- 19720
- Mailing
- 2 DOCK VIEW DRIVE, NEW CASTLE, DE 19720
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493120
- Employees
- 60
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 A02
- Issued
- Jan 28, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $6,294 · Current $6,294
General-duty citation text
29 CFR 1910.22(a)(2): The floor of every workroom was not maintained in a clean and, so far as possible, a dry condition: (a) Refrigerated Warehouse, inside the freezer at the B-South Freezer Door - On or about October 5, 2021, the employer failed to prevent icing in a floor area adjacent to the B-South Freezer Door, exposing employees to a slipping hazards. Pursuant to 29 CFR 1903.19, the employer must submit abatement certification, required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $6294
1910.178 A04
- Issued
- Jan 28, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $8,810 · Current $8,810
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) Refrigerated Warehouse, inside the freezer - On or about October 5, 2021, and on prior dates, the employer failed to prevent the use of work platforms, not approved for use by forklift manufacturers, such as Nissan, for fork-lifting these platforms while occupied by employees, to heights, exposing employees to a fall hazard. Pursuant to 29 CFR 1903.19, the employer must submit abatement certification and documentation, required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $8810
1910.178 L04 II A
- Issued
- Jan 28, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $8,810 · Current $8,810
General-duty citation text
29 CFR 1910.178(l)(4)(ii)(A): The operator has been observed to operate the vehicle in an unsafe manner: (a) Refrigerated Warehouse, inside the freezer - On or about October 5, 2021, the employer failed to prevent the unsafe operation of forklifts in that the operator was distracted while backing up the forklift at an accelerated rate with forks raised carrying a raised safety cage occupied by an employee who sustained serious injury when the safety cage crashed into the safety bollard protecting the B-South freezer door, sliding off the forks and plummeting approximately ten (10) feet to the concrete floor. Pursuant to 29 CFR 1903.19, the employer must submit abatement certification and documentation, required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- — Z (S) $8810
More inspections at MTC Logistics
View MTC Logistics's full OSHA safety record →
More inspections in this industry (NAICS 493120)
More inspections in DE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345452056.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.