BETHLEHEM, NH —
OSHA Inspection: GO GREEN WOOD PRODUCTS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GO GREEN WOOD PRODUCTS, LLC in 1161 WHITEFIELD ROAD, BETHLEHEM, NH 03574 (NAICS 321113). OSHA activity number 345468359.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GO GREEN WOOD PRODUCTS, LLC
- Site address
- 1161 WHITEFIELD ROAD
- City
- BETHLEHEM
- State
- NH
- ZIP
- 03574
- Mailing
- PO BOX 455, LITTLETON, NH 03561
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.219 C02 I
- Issued
- Oct 26, 2021
- Abate by
- Dec 15, 2021
- Penalty
- Initial $3,218 · Current $2,550 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i):All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: Location: Sawmill. On or about August 10, 2021, the outer horizontal shafts on both sides at the end of the green chain conveyor were not completely enclosed by stationary casings.
Recent events (2)
- — I (S) $2550
- — Z (S) $3218
1910.219 C04 I
- Issued
- Oct 26, 2021
- Abate by
- Dec 15, 2021
- Penalty
- Initial $3,218 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Shaft ends projecting more than one-half the diameter of the shaft were not guarded by nonrotating caps or safety sleeves: Location: Sawmill. On or about August 10, 2021, the horizontal shaft ends on both sides at the end of the green chain conveyor were not guarded by nonrotating caps or safety sleeves.
Recent events (2)
- — I (S) $0
- — Z (S) $3218
1910.219 H01
- Issued
- Oct 26, 2021
- Abate by
- Dec 15, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(h)(1): Projecting key(s), setscrew(s), or other projections in revolving part(s) were not removed, made flush, or guarded by metal cover(s): Location: Sawmill. On or about August 10, 2021, the projecting setscrews on the horizontal shaft ends on both sides at the end of the green chain conveyor were not removed, made flush, or guarded by metal covers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- Oct 26, 2021
- Abate by
- Dec 15, 2021
- Penalty
- Initial $3,218 · Current $2,550 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: Location: Sawmill. On or about August 10, 2021, the in-running nip points on the sprocket wheels and chains on both sides at the end of the green chain conveyor were not enclosed.
Recent events (2)
- — I (S) $2550
- — Z (S) $3218
More inspections at GO Green Wood Products, LLC
View GO Green Wood Products, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345468359.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.