NEW YORK, NY —
OSHA Inspection: EMPIRE EXHAUST SYSTEMS LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EMPIRE EXHAUST SYSTEMS LLC in 151 2ND AVE, NEW YORK, NY 10003 (NAICS 238220). OSHA activity number 345484778.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EMPIRE EXHAUST SYSTEMS LLC
- Site address
- 151 2ND AVE
- City
- NEW YORK
- State
- NY
- ZIP
- 10003
- Mailing
- 5502 68TH ST. APT 1, MASPETH, NY 11378
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.350 H
- Issued
- Feb 16, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $4,351 · Current $2,875 Reduced
General-duty citation text
29 CFR 1926.350(h): 29 CFR 1926.350(h): Regulators and Gauges. Oxygen and fuel gas pressure regulators, including their related gauges, were not in proper working order while in use: Location: 151 2nd Ave On or about: August 18, 2021 a) Employees welding ventilation ducts and the tanks gas pressure gauges were damaged.
Recent events (2)
- — I (S) $2875
- — Z (S) $4351
1926.452 O03
- Issued
- Feb 16, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $4,351 · Current $2,875 Reduced
General-duty citation text
29 CFR 1926.452(o)(3): Boatswains' chair tackle shall consist of correct size ball bearings or bushed blocks containing safety hooks and properly "eye-spliced" minimum five-eighth (5/8) inch (1.6 cm) diameter first-grade manila rope, or other rope which will satisfy the criteria (e.g., strength and durability) of manila rope. Location: 151 2nd Ave On or about: August 18, 2021 a) Employees were working from a boatswain chair that had a damaged safety hook.
Recent events (2)
- — I (S) $2875
- — Z (S) $4351
1926.452 O06
- Issued
- Feb 16, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $4,351 · Current $2,875 Reduced
General-duty citation text
29 CFR 1926.452(o)(6): When a heat-producing process such as gas or arc welding is being conducted, boatswains' chair seat slings shall be a minimum of three-eight (3/8) inch (1.0 cm) wire rope. Location: 151 2nd Ave On or about: August 18, 2021 a) An employee was performing arc welding from a boatswains chair and the seat slings were nylon cords and not wire rope.
Recent events (2)
- — I (S) $2875
- — Z (S) $4351
1926.501 B01
- Issued
- Feb 16, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $4,351 · Current $2,875 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. Location: 151 2nd Ave On or about: 18 August 2021 a) Employees were working near an unprotected edge of a roof. Employees exposed to a fall of approximately 60 feet.
Recent events (2)
- — I (S) $2875
- — Z (S) $4351
More inspections in this industry (NAICS 238220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345484778.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.