ROMULUS, NY —
OSHA Inspection: BYLER'S SAWMILL LLC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of BYLER'S SAWMILL LLC in 5935 ROUTE 96, ROMULUS, NY 14541 (NAICS 321113). OSHA activity number 345490270.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BYLER'S SAWMILL LLC
- Site address
- 5935 ROUTE 96
- City
- ROMULUS
- State
- NY
- ZIP
- 14541
- Mailing
- 5935 ROUTE 96, ROMULUS, NY 14541
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Feb 10, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $4,351 · Current $2,176 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative a) Byler's Sawmill, chipper area, on or about 8/16/2021: The employer did not implement lockout/tagout procedures to protect employees working in the danger zone under the discharge slides while picking up scrap pieces of wood.
Recent events (2)
- — I (S) $2175.5
- — Z (S) $4351
1910.147 C04 I
- Issued
- Feb 10, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a)At Byler's Sawmill, chipper area, on or about 8/16/2021: The employer did not utilize lockout/tagout procedures to protect employees working in the danger zone under the discharge slides while picking up scrap pieces of wood.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C05 I
- Issued
- Feb 10, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(i):Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a)At Byler's Sawmill, chipper area, on or about 8/16/2021: The employer did not provide hardware for locking out energy sources by employees working in the danger zone under the discharge slides while picking up scrap pieces of wood.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Feb 10, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide training to ensure that the purpose and function of the energy control program were understood by authorized, affected, and other employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by authorized employees: a)At Byler's Sawmill, chipper area, on or about 8/16/2021: The employer did not provide lockout/tagout training to employees working in the danger zone under the discharge slides while picking up scrap pieces of wood.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.265 C18 I
- Issued
- Feb 10, 2022
- Abate by
- Feb 23, 2022
- Penalty
- Initial $4,351 · Current $2,176 Reduced
General-duty citation text
29 CFR 1910.265(c)(18)(i): Means were not provided to guard against accidental injury to personnel at conveyor transfer, loading, or discharge point(s), and exposed personnel to struck by hazards: a) Byler's Sawmill, cant slides, on or about 8/16/2021: The employer did not provide guards to protect employees from struck by hazards of sliding cants at conveyor transfer, loading, or discharge points.
Recent events (2)
- — I (S) $2175.5
- — Z (S) $4351
More inspections at Byler'S Sawmill LLC
View Byler'S Sawmill LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345490270.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.