Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROGER HERRERA

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of ROGER HERRERA in 220 FOXGLOVE LANE, WAXAHACHIE, TX 75165 (NAICS 238140). OSHA activity number 345492466.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Roger Herrera — free Get an email when a new federal OSHA severe-injury report for Roger Herrera is published. One employer, no account, unsubscribe in one click.
Establishment
ROGER HERRERA
Site address
220 FOXGLOVE LANE
City
WAXAHACHIE
State
TX
ZIP
75165
Mailing
4316 ASTOR RD, MESQUITE, TX 75150
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 2 exposed
Issued
Aug 20, 2021
Abate by
Sep 20, 2021
Penalty
Initial $1,755 · Current $1,755
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns.   At the construction site, the employer did not ensure that employees were wearing hardhats while working below other employees. Employees were exposed to a struck-by hazard from falling objects.
Recent events (1)
  • — Z (S) $1755

1926.451 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 20, 2021
Abate by
Sep 20, 2021
Penalty
Initial $2,926 · Current $2,926
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii).  At the construction site, employees were working on a welded frame scaffold that was not fully planked. The employees performing masonry activities were exposed to a 19 feet fall hazard.
Recent events (1)
  • — Z (S) $2926

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 20, 2021
Abate by
Sep 20, 2021
Penalty
Initial $2,926 · Current $2,926
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  At the construction site, employees were working on a welded frame scaffold without ladder access/egress. The employees climbed the end and cross bracing exposing them to a fall hazard.
Recent events (1)
  • — Z (S) $2926

1926.451 G04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 20, 2021
Abate by
Sep 20, 2021
Penalty
Initial $2,926 · Current $2,926
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.  At the construction site, employees were working on a welded frame scaffold without guardrails. The employees performing masonry activities were exposed to fall hazards up to 19 feet to the ground below.
Recent events (1)
  • — Z (S) $2926

1926.454 A

Serious Gravity 1 1 instance 2 exposed
Issued
Aug 20, 2021
Abate by
Sep 20, 2021
Penalty
Initial $1,755 · Current $1,755
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  At the construction site, employees were working on a welded frame scaffold without the knowledge and skills to recognize and eliminate hazards associated with working with scaffolds and at heights over 6 feet.
Recent events (1)
  • — Z (S) $1755

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345492466.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.