GARLAND, TX —
OSHA Inspection: GENESIS MILLWORK, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of GENESIS MILLWORK, LLC in 920 PROFIT DRIVE, GARLAND, TX 75040 (NAICS 337212). OSHA activity number 345502975.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GENESIS MILLWORK, LLC
- Site address
- 920 PROFIT DRIVE
- City
- GARLAND
- State
- TX
- ZIP
- 75040
- Mailing
- 920 PROFIT DRIVE, GARLAND, TX 75040
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337212
- Employees
- 32
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L04 III
- Issued
- Nov 1, 2021
- Abate by
- Nov 29, 2021
- Penalty
- Initial $5,803 · Current $3,482 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): Located at this establishment, an evaluation of each powered industrial truck operator's performance had not been conducted at least once every three years, such as, but not limited to, employees operating the forklifts without current training. (a) On or about August 30, 2021, and at times prior thereto, designated forklift operators did not receive an evaluation of operator performance within the previous 3 years.
Recent events (2)
- — I (S) $3481.8
- — Z (S) $5803
1910.134 C01
- Issued
- Nov 1, 2021
- Abate by
- Nov 29, 2021
- Penalty
- Initial $9,557 · Current $5,734 Reduced
2590V109
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) On or about August 30, 2021 and at times prior thereto, the employer required employees to wear half-face chemical cartridge respirators in the paint spray booth areas without having a written respiratory protection program in place.
Recent events (2)
- — I (S) $5734.2
- — Z (S) $9557
1910.134 E01
- Issued
- Nov 1, 2021
- Abate by
- Nov 29, 2021
- Penalty
- Initial $0 · Current $0
20372590
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) On or about August 30, 2021 and at times prior thereto, the employer allowed employees to wear half-face respirators with chemical cartridges in the paint spray booth area without having a medical evaluation to determine the employee's ability to use a respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F01
- Issued
- Nov 1, 2021
- Abate by
- Nov 29, 2021
- Penalty
- Initial $0 · Current $0
20372590
General-duty citation text
29 CFR 1910.134(f)(1):The employer did not ensure that employees required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): (a) On or about August 30, 2021 and at times prior thereto, (the employer did not provide any respirator fit-testing for employees required to wear respirators in the painting area at the worksite.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K01
- Issued
- Nov 1, 2021
- Abate by
- Nov 29, 2021
- Penalty
- Initial $0 · Current $0
20372590
General-duty citation text
29 CFR 1910.134(k)(1): The employer did not provide effective training that covered the required elements in 1910.134(k)(1)(i) through 1910.134(k)(1)(vii) for employees using respirators: (a) On or about August 30, 2021 and at times prior thereto, the employer did not provide any training covering the required elements for employees required to wear tight-fitting respirators at the worksite.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Nov 1, 2021
- Abate by
- Nov 29, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2):The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: (a) On or about August 30, 2021, and at times prior thereto, the employer did not verify that the required workplace hazard assessment had been performed through a written certification for employees working in the paint booth area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Genesis Millwork, LLC
View Genesis Millwork, LLC's full OSHA safety record →
More inspections in this industry (NAICS 337212)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345502975.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.