STATEN ISLAND, NY —
OSHA Inspection: FAZTEC INDUSTRIES
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of FAZTEC INDUSTRIES in 200 BLOOMFIELD AVENUE, STATEN ISLAND, NY 10314 (NAICS 562998). OSHA activity number 345503247.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAZTEC INDUSTRIES
- Site address
- 200 BLOOMFIELD AVENUE
- City
- STATEN ISLAND
- State
- NY
- ZIP
- 10314
- Mailing
- 200 BLOOMFIELD AVENUE, STATEN ISLAND, NY 10314
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562998
- Employees
- 43
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C01
- Issued
- Feb 23, 2022
- Abate by
- Mar 21, 2022
- Penalty
- Initial $10,151 · Current $10,151
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: A) FAZTEC Industries - 200 Bloomfield Ave, Staten Island NY 10314 (M241 Discharge belt, yard area) a) The employer did not establish and implement a Lock Out Tag Out Program containing energy control procedures, employee training and periodic inspections to assist employees engaged in maintenance activities. Condition noted on or about August 27, 2021 and thereafter.
Recent events (3)
- — J (S) $10151
- — C (S) $10151
- — Z (S) $10151
1910.147 C04 I
- Issued
- Feb 23, 2022
- Abate by
- Mar 21, 2022
- Penalty
- Initial $10,151 · Current $10,151
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: FAZTEC Industries - 200 Bloomfield Ave, Staten Island N.Y. 10314 (M241 Discharge belt) A) Employer did not develop and/or documented procedures to utilize for the control of hazardous energy during maintenance activities (preventive mainteance, jams, belt replacement, lubrication) at conveyor system to protect authorized workers. Condition created on or about August 27, 2021 and thereafter.
Recent events (3)
- — J (O) $10151
- — C (S) $10151
- — Z (S) $10151
1910.147 C05 I
- Issued
- Feb 23, 2022
- Penalty
- Initial $10,151 · Current $10,151
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing, or blocking of machines or equipment from energy sources: FAZTEC Industries - 200 Bloomfield Ave, Staten Island NY 10314 A) Employees were not provided with the devices needed to perform LOTO such as but not limited to; Locks, tags, wedges, blocks, or other hardware for isolating, securing or blocking equipment from energy sources. Condition noted on or about August 27, 2021 and thereafter.
Recent events (3)
- — J (S) $10151
- — C (S) $10151
- — Z (S) $10151
1910.147 C07 I
- Issued
- Feb 23, 2022
- Abate by
- Mar 21, 2022
- Penalty
- Initial $10,151 · Current $10,151
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: FAZTEC Industries - 200 Bloomfield Ave, Staten Island NY 10314 M241 Discharge belt conveyor A) The employer did not train employees on the LOTO elements when performing maintenance on the conveyor system to control all the energy sources. Condition noted on or about August 27, 2021 and thereafter.
Recent events (3)
- — J (O) $10151
- — C (S) $10151
- — Z (S) $10151
1910.335 A01 I
- Issued
- Feb 23, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
29 C.F.R. 1910.335(a)(1)(i): Employees working in areas where there are potential electrical hazards were not provided with electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed. A. FAZTEC Industries -200 Bloomfield Ave, Staten Island NY 10314 (M241 Discharge belt/ Yard) Damaged cable insulation of conductors operating at 460VAC were not protected with an insulator equivalent to that of cables? original insulator or with an insulating device for that purpose. At the M241 Discharge Belt the employer did not ensure the equipment?s energized conductors supplying power to the belt/motor were free from recognized hazards. Violation occurred on or about August 27, 2021
Recent events (3)
- — J (S) $14502
- — C (S) $14502
- — Z (S) $14502
1910.303 B07
- Issued
- Feb 23, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
29 CFR 1910.303(b)(7): Mechanical execution of work. Electric equipment was not installed in a neat, safe and workmanlike manner. A) FAZTEC Industries - 200 Bloomfield Ave, Staten Island NY 10314 Damaged cable insulation of conductors (exposed copper) operating at 460VAC were not protected with an insulator equivalent to that of cables original insulator or with an insulating device for that purpose. Condition noted on or about August 27, 2021
Recent events (3)
- — J (S) $14502
- — C (S) $14502
- — Z (S) $14502
1910.303 B07 IV
- Issued
- Feb 23, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
29 CFR 1910.303(b)(7)(iv): Employer did not make sure there were no damaged parts that would adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating. A) FAZTEC Industries - 200 Bloomfield Ave, Staten Island NY 10314 The employer did not conduct proper inspection and repair of conductors. Energized conductors operating at 460VAC were damaged exposing energized 2 phases of the copper conductors. Condition noted on or about August 27, 2021
Recent events (3)
- — J (S) $14502
- — C (S) $14502
- — Z (S) $14502
More inspections at Faztec Industries
View Faztec Industries's full OSHA safety record →
More inspections in this industry (NAICS 562998)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345503247.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.