EDINBURG, PA —
OSHA Inspection: MORRIS PAINTING INC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of MORRIS PAINTING INC in 1701 MOHAWK SCHOOL ROAD, EDINBURG, PA 16116 (NAICS 238320). OSHA activity number 345503791.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MORRIS PAINTING INC
- Site address
- 1701 MOHAWK SCHOOL ROAD
- City
- EDINBURG
- State
- PA
- ZIP
- 16116
- Mailing
- 91 STRUTHERS-LIBERTY ROAD, YOUNGSTOWN, OH 44505
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238320
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 25, 2022
- Abate by
- Mar 17, 2022
- Penalty
- Initial $14,502 · Current $10,000 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1) Section 5(a)(1) of the Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that on August 30, 2021 an employee was exposed to an electrical shock while coming into close proximity to a ground wire on a transmission structure. a.) Morris Painting, Inc. - 1701 - Mowhawk School Road Edinburg, PA: On or about 8/30/2021, employee was conducting painting operations at an elevated section of the power transmission tower near the ground wire. Abatement Note: Among other methods, feasible and acceptable means to abate this hazard would be the following: Employer will establish a work practice requiring that employees not paint within two (2) feet of any ground wire on electrical transmission structures unless it is determined to be safe by the utility company or host employer. In addition, the employer agrees to incorporate into its employee training the potential hazards associated with static electricity/induced voltage and ground wires. ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation. This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement. IN ADDITION, abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic, or video evidence or abatement or other written records.
Recent events (2)
- — I (S) $10000
- — Z (S) $14502
1926.960 D01
- Issued
- Feb 25, 2022
- Abate by
- Mar 17, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.960(d)(1): Working from below. The employer did not ensure that each employee, to the extent that other safety-related conditions at the worksite permitted, worked in a position from which a slip or shock would not bring the employee's body into contact with exposed, uninsulated parts : a.) Morris Painting, Inc.; 1701 Mohawk School Road, Edinburgh, PA - On or about 8/30/21, employees were exposed to electrical shock while coating/painting an electrical power transmission tower within the minimum approach distance without protective measures. ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation. This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement. IN ADDITION, abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic, or video evidence or abatement or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.960 D02
- Issued
- Feb 25, 2022
- Abate by
- Mar 17, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.960(d)(2): Requirements for working without electrical protective equipment. When an employee performed work near exposed parts energized at more than 600 volts, but not more than 72.5 kilovolts, and was not wearing rubber insulating gloves, protected by insulating equipment covering the energized parts, performed work using live-line tools, or performed live-line barehand work under � 1926.964(c), the employee was not working from a position where he or she could not reach into the minimum approach distance, established by the employer under paragraph (c)(1) of this section. a.) Morris Painting, Inc.; 1701 Mohawk School Road, Edinburgh, PA - On or about 8/30/21, employees were exposed to electrical shock while coating/painting an electrical power transmission tower within the minimum approach distance without protective measures. ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation. This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement. IN ADDITION, abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic, or video evidence or abatement or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 I01
- Issued
- Feb 25, 2022
- Abate by
- Apr 13, 2022
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200), and did not ensure that each employee has access to labels on containers of crystalline silica and safety data sheets, and is trained in accordance with the provisions of HCS and paragraph (i)(2) of this section to ensure that hazards associated with cancer, lung effects, immune system effects, and kidney effects are addressed: A) Morris Painting, Inc., 1701 Mohawk School Road, Edinburg, PA - On or about 8/30/21, and at times prior thereto: Employees worked with and/or were potentially exposed to crystalline silica while conducting operations including, but not limited to, cleaning dried Anodic S/P Gray paint off of equipment. Silica was not included in the employer's hazard communication program. B) Morris Painting, Inc., 1701 Mohawk School Road, Edinburg, PA. - On or about 8/30/21, and at times prior thereto: Employees worked with and/or were potentially exposed to crystalline silica while conducting operations including, but not limited to, cleaning dried Anodic S/P Gray paint off equipment. Employees were not trained in accordance with the provisions of the Hazard Communication Standard (HCS) and paragraph (i)(2) of this section to ensure that hazards associated with cancer, lung effects, immune system effects, and kidney effects were addressed. Abatement certification is required within 10 days after the abatement date noted on the citation. This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Morris Painting INC
View Morris Painting INC's full OSHA safety record →
More inspections in this industry (NAICS 238320)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345503791.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.