Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: 4C ENERGY SERVICES, LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of 4C ENERGY SERVICES, LLC in 1511 S COUNTY RD 1101, MIDLAND, TX 79706 (NAICS 213112). OSHA activity number 345509707.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch 4C Energy Services, LLC — free Get an email when a new federal OSHA severe-injury report for 4C Energy Services, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1511 S COUNTY RD 1101
City
MIDLAND
State
TX
ZIP
79706
Mailing
1511 S COUNTY RD 1101, MIDLAND, TX 79706
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
213112
Employees
15
Ownership type
A

5 citations on file for this inspection.

1910.147 C02 II

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 9, 2021
Abate by
Jan 10, 2022
Penalty
Initial $5,461 · Current $3,500 Reduced
29 CFR  1910.147(c)(2)(ii):The employer's tagout energy control program procedures did not successfully comply with 29 CFR 1910.147(c)(3) and no lockout was provided for employee protection:   On or about September 1, 2021 employees engaged in semi truck and trailer repair activities were exposed to struck-by hazards as the employer failed to ensure the use of lockout tag out.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5461

1910.147 C04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 9, 2021
Abate by
Jan 10, 2022
Penalty
Initial $5,461 · Current $3,500 Reduced
29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  On or about September 1, 2021 employees engaged in performing repair activities on a semi truck and trailer were exposed to struck-by hazards as the employer failed to specifically outline the procedures to control hazardous energy.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5461

1910.147 E02 I

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 9, 2021
Abate by
Jan 10, 2022
Penalty
Initial $5,461 · Current $3,500 Reduced
29 CFR  1910.147(e)(2)(i): Before lockout or tagout devices were removed and energy was restored to the machine or equipment, authorized employees did not ensure that all employees had been safely positioned or removed from the work area:  On or about September 1, 2021 employees engaged in performing repair activities on a semi truck and trailer were exposed to struck-by hazards as the employer failed  to ensure all employees had been safely positioned from the work area.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5461

1910.147 C06 I

Other-than-serious 1 instance 2 exposed
Issued
Dec 9, 2021
Abate by
Jan 10, 2022
Penalty
Initial $438 · Current $250 Reduced
29 CFR  1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  On or about September 1, 2021 employees performing repair activities on a semi truck and trailer were exposed to struck-by hazards as the employer failed to conduct periodic inspections of the energy control procedures.
Recent events (2)
  • — I (O) $250
  • — Z (O) $438

1910.147 C07 IV

Other-than-serious 1 instance 2 exposed
Issued
Dec 9, 2021
Abate by
Jan 10, 2022
Penalty
Initial $438 · Current $250 Reduced
29 CFR  1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date:  On or about September 1, 2021 employees performing repair activities on a semi truck and trailer were exposed to struck-by hazards due to the employer failed to certify that employee training had been accomplished.
Recent events (2)
  • — I (O) $250
  • — Z (O) $438

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345509707.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.