HUTCHINSON, KS —
OSHA Inspection: CENTRAL WELDING & MACHINE, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CENTRAL WELDING & MACHINE, LLC in 218 N WHITESIDE ST, HUTCHINSON, KS 67504 (NAICS 332710). OSHA activity number 345509913.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL WELDING & MACHINE, LLC
- Site address
- 218 N WHITESIDE ST
- City
- HUTCHINSON
- State
- KS
- ZIP
- 67504
- Mailing
- 218 N WHITESIDE ST, HUTCHINSON, KS 67504
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.110 F06 II
- Issued
- Nov 2, 2021
- Abate by
- Nov 30, 2021
- Penalty
- Initial $2,341 · Current $1,171 Reduced
General-duty citation text
29 CFR 1910.110(f)(6)(ii):Containers were not stored in a suitable enclosure or otherwise protected against tampering: In the welding shop, employees engaged in welding activities were exposed to fire, struck-by or other hazards in that the employer stored a portable Propylene gas cylinder, not in an enclosure and not protected against tampering.
Recent events (2)
- — I (S) $1170.5
- — Z (S) $2341
1910.110 F02 II
- Issued
- Nov 2, 2021
- Abate by
- Nov 30, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.110(f)(2)(ii):LP gas containers stored inside were located near exits, stairways, or in areas normally used or intended for the safe exit of people: In the welding shop, employees engaged in welding activities were exposed to fire, struck-by or other hazards in that the employer stored a portable Propylene gas cylinder, in an area intended for the safe exit of people.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L
- Issued
- Nov 2, 2021
- Abate by
- Nov 30, 2021
- Penalty
- Initial $3,511 · Current $2,107 Reduced
General-duty citation text
29 CFR 1910.178(l): Operators were not trained in the safe operation of powered industrial trucks: In the welding shop, employees engaged in welding activities were exposed to serious crushing and struck-by injuries. Forklift operators had not completed a forklift training program that met the requirements of OSHA standard 1910.178(l) powered industrial trucks, operator training.
Recent events (2)
- — I (S) $2106.6
- — Z (S) $3511
1910.184 D
- Issued
- Nov 2, 2021
- Abate by
- Nov 30, 2021
- Penalty
- Initial $2,341 · Current $1,288 Reduced
General-duty citation text
29 CFR 1910.184(d): Damaged or defective sling(s) were not immediately removed from service: In the welding shop, employees engaged in welding activities were exposed to struck by hazards in that the employer failed to ensure synthetic web slings were being inspected and failed to remove from service a synthetic sling that was missing legible labels or tags and had visible wear and tear.
Recent events (2)
- — I (S) $1287.55
- — Z (S) $2341
1910.184 E01
- Issued
- Nov 2, 2021
- Abate by
- Nov 30, 2021
- Penalty
- Initial $2,341 · Current $1,171 Reduced
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: In the welding shop, employees engaged in welding activities were exposed to struck-by hazards in that the employer permitted the use of alloy steel chain slings without a permanently affixed durable identification stating size, grade, rated capacity, and reach.
Recent events (2)
- — I (S) $1170.5
- — Z (S) $2341
1910.212 A03 II
- Issued
- Nov 2, 2021
- Abate by
- Nov 30, 2021
- Penalty
- Initial $2,341 · Current $1,405 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): In the welding shop, employees engaged in manufacturing activities were exposed to amputation and struck-by hazards, in that the point of operation was not guarded in Bridge Mill.
Recent events (2)
- — I (S) $1404.6
- — Z (S) $2341
More inspections at Central Welding & Machine, LLC
View Central Welding & Machine, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345509913.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.