VERONA, MS —
OSHA Inspection: STYLE-LINE FURN., INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of STYLE-LINE FURN., INC. in 116 GODFREY RD., VERONA, MS 38879 (NAICS 337121). OSHA activity number 345522718.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STYLE-LINE FURN., INC.
- Site address
- 116 GODFREY RD.
- City
- VERONA
- State
- MS
- ZIP
- 38879
- Mailing
- 116 GODFREY RD., VERONA, MS 38879
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337121
- Employees
- 125
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Oct 13, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $7,022 · Current $4,213 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. (a) Double Miter Saws - On or about September 9, 2021 the employer did not ensure procedures specific to each machine were developed, documented and utilized for the control of energy sources of equipment such as but not limited to electrical, pneumatic and rotational energy when employees performed servicing and maintenance, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $4213.2
- — Z (S) $7022
1910.147 C07 I
- Issued
- Oct 13, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: (a) Facility - On or about September 9, 2021 the employer did not complete employee training on the company's energy control program, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 A12
- Issued
- Oct 13, 2021
- Abate by
- Nov 4, 2021
- Penalty
- Initial $12,288 · Current $7,373 Reduced
General-duty citation text
29 CFR 1910.213(a)(12): For all circular saws where conditions are such that there is a possibility of contact with the portion of the saw either beneath or behind the table, that portion of the saw shall be covered with an exhaust hood, or, if no exhaust system is required, with a guard that shall be so arranged as to prevent accidental contact with the saw. (a) Double Miter Saw - On or about September 9, 2021 the employer did not install guarding to prevent the operator from being struck-by the rotating circular saw blades during operation.
Recent events (2)
- — I (S) $7372.8
- — Z (S) $12288
1904.39 A02
- Issued
- Oct 13, 2021
- Penalty
- Initial $8,778 · Current $5,267 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. (a) Jobsite - On or about September 9, 2021 the employer failed to notify the local OSHA office concerning an in-patient hospitalization.
Recent events (2)
- — I (O) $5266.8
- — Z (O) $8778
1910.178 L06
- Issued
- Oct 13, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation. (a) Facility - On or about September 9, 2021 the employer did not certify employees that operate forklifts exposing employees to struck-by hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Style-Line Furn., INC.
View Style-Line Furn., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337121)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345522718.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.