Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: PABLO MULATO

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of PABLO MULATO in 664 AVALON DRIVE, WAXAHACHIE, TX 75165 (NAICS 238140). OSHA activity number 345563126.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pablo Mulato for free Get an email when a new federal OSHA severe-injury report for Pablo Mulato is published. One employer, no account, unsubscribe in one click.
Establishment
PABLO MULATO
Site address
664 AVALON DRIVE
City
WAXAHACHIE
State
TX
ZIP
75165
Mailing
2402 MARYLAND AVENUE, DALLAS, TX 75216
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
Private (A)

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 8, 2021
Abate by
Oct 19, 2021
Penalty
Initial $2,341 · Current $1,405 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  At the job site, employees were not provided eye protection when operating a Rigid masonry saw cutting bricks and were exposed to eye injuries from flying objects.
Recent events (2)
  • · I (S) $1404.6
  • · Z (S) $2341

1910.134 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 8, 2021
Abate by
Oct 19, 2021
Penalty
Initial $2,341 · Current $1,405 Reduced
29 CFR 1910.134(a)(2):  A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee: (Construction Reference 1926.103)  At the jobsite, employees who were cutting masonry brick with a Ridgid Masonry cutting saw were not protected with personal protective equipment and exposed to respiratory hazards from the dust, silica dust and particles.
Recent events (2)
  • · I (S) $1404.6
  • · Z (S) $2341

1926.1153 C01

Serious Gravity 1 1 instance 1 exposed
Issued
Oct 8, 2021
Abate by
Oct 19, 2021
Penalty
Initial $1,755 · Current $1,053 Reduced
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.   At the construction site, the employer did not ensure that employees using a Rigid masonry saw to cut bricks and stones were protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (2)
  • · I (S) $1053
  • · Z (S) $1755

1926.1153 D02 I

Serious Gravity 1 1 instance 1 exposed
Issued
Oct 8, 2021
Abate by
Oct 19, 2021
Penalty
Initial $0 · Current $0
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:   At the residential construction site, the employer did not assess the exposure for employees using a Rigid masonry saw and a portable masonry saw to cut bricks. Employees were potentially exposed to silica.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345563126.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.