LANETT, AL —
OSHA Inspection: MJ SYSTEM, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MJ SYSTEM, LLC. in 3621 45TH STREET SOUTHWEST, LANETT, AL 36863 (NAICS 332312). OSHA activity number 345563191.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MJ SYSTEM, LLC.
- Site address
- 3621 45TH STREET SOUTHWEST
- City
- LANETT
- State
- AL
- ZIP
- 36863
- Mailing
- 3621 45TH STREET SOUTHWEST, LANETT, AL 36863
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Nov 18, 2021
- Abate by
- Dec 8, 2021
- Penalty
- Initial $4,681 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Production Floor; On or about October 4, 2021 and at times prior thereto, the employer exposed employees to struck-by hazards in that powered industrial truck operators had not received the required training to operator powered industrial truck to move heavy steel materials and finished steel products in a congested area.
Recent events (2)
- — I (S) $3000
- — Z (S) $4681
1910.252 B02 III
- Issued
- Nov 18, 2021
- Abate by
- Dec 8, 2021
- Penalty
- Initial $2,340 · Current $1,305 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii):Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields or required to wear protective goggles. a) Production Floor; On or about October 4, 2021 and at times prior thereto, the employer exposed employees to eye injuries in that he employer did not provide welders with shielding that would prevent pedestrian traffic from being exposed to welding rays.
Recent events (2)
- — I (S) $1305
- — Z (S) $2340
1910.1200 E01 I
- Issued
- Nov 18, 2021
- Abate by
- Dec 8, 2021
- Penalty
- Initial $2,340 · Current $1,305 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheets: a) Production floor; On or about October 4, 2021 and times prior thereto, the employer exposed employees to chemical hazards such as, but not limited to, LP gas, cutting oil, nozzle dip grease, and MiG welding wire which can result in ingestion, absorption, and inhalation hazards.
Recent events (2)
- — I (S) $1305
- — Z (S) $2340
1910.1200 E02
- Issued
- Nov 18, 2021
- Abate by
- Dec 8, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(2):The employer that produced, used, or stored hazardous chemicals at the workplace in such a way that employees of other employer(s) could be exposed did not ensure that the hazard communication program included all of the elements outlined in 29 CFR 1910.1200(e)(2)(i) through 29 CFR 1910.1200(e)(2)(iii): a) Production floor; On or about October 4, 2021 and times prior thereto, the employer exposed employees to chemical hazards such as, but not limited to, LP gas, cutting oil, nozzle dip grease, and MiG welding wire which can result in ingestion, absorption, and inhalation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E04
- Issued
- Nov 18, 2021
- Abate by
- Dec 8, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(4):The employer's written hazard communication program was not made available to the compliance safety and health officer. a) Production floor; On or about October 4, 2021 and at times prior thereto, the employer exposed employees to chemical hazards in that the employer had not developed a hazard communication program.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Nov 18, 2021
- Abate by
- Dec 8, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. a) Production floor; On or about October 4, 2021 and times prior thereto, the employer exposed employees to chemical hazards such as, but not limited to, LP gas, cutting oil, nozzle dip grease, and MiG welding wire which can result in ingestion, absorption, and inhalation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 332312)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345563191.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.