SOUTHAMPTON, NY —
OSHA Inspection: SANCHEZ PERFECT DONE CONSTRUCTION INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SANCHEZ PERFECT DONE CONSTRUCTION INC. in 1370 MAJORS PATH, SOUTHAMPTON, NY 11968 (NAICS 236118). OSHA activity number 345572937.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SANCHEZ PERFECT DONE CONSTRUCTION INC.
- Site address
- 1370 MAJORS PATH
- City
- SOUTHAMPTON
- State
- NY
- ZIP
- 11968
- Mailing
- P.O BOX 3030, SAG HARBOR, NY 11963
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.21 B02
- Issued
- Mar 16, 2022
- Abate by
- Mar 28, 2022
- Penalty
- Initial $3,108 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.21(b)(2):The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: a) Worksite, 1370 Majors Path, Southampton, New York, North Side of the Southampton Youth Services Building: On or about October 09, 2021, an employee was operating a Makita HS7610 Circular Saw rewired with a 2-prong light duty power cord and with the guard in the open position. The employer did not instruct the employee in the recognition and avoidance of unsafe conditions and regulations applicable to control or eliminate hazard or other exposure to injury to include struck-by hazards. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $1500
- — C (S) $3108
- — Z (S) $3108
1926.300 A
- Issued
- Mar 16, 2022
- Abate by
- Mar 28, 2022
- Penalty
- Initial $4,351 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.300(a):Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition: a) Worksite, 1370 Majors Path, Southampton, New York, North Side of the Southampton Youth Services Building: On or about October 09, 2021, an employee was operating a Makita HS7610 Circular Saw rewired with a 2-prong light duty power cord and with the guard in the open position. The employer did not furnish the employee with a circular maintained in a safe condition. Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $2500
- — C (S) $4351
- — Z (S) $4351
1926.302 A01
- Issued
- Mar 16, 2022
- Penalty
- Initial $4,351 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.302(a)(1): The noncurrent-carrying metal parts of electrical power operated hand tool(s) were not grounded, or of the approved double insulated type: a) Worksite, 1370 Majors Path, Southampton, New York, North Side of the Southampton Youth Services Building: On or about October 09, 2021, an employee was exposed to electrical shock hazards when operating a Makita HS7610 Circular Saw that was rewired with a 2-prong light duty power cord. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — F (S) $2500
- — C (S) $4351
- — Z (S) $4351
1926.304 D
- Issued
- Mar 16, 2022
- Penalty
- Initial $4,351 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.304(d): When the tool was withdrawn from the work, the lower guard did not automatically and instantly return to the covering position. a) Worksite, 1370 Majors Path, Southampton, New York, North Side of the Southampton Youth Services Building: On or about October 09, 2021, an employee was exposed to amputation hazards when operating a Makita HS7610 Circular Saw in that the guard did not automatically and instantly return to the covered position. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — F (S) $2500
- — C (S) $4351
- — Z (S) $4351
More inspections in this industry (NAICS 236118)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345572937.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.