LEAGUE CITY, TX —
OSHA Inspection: JOSE SANJUAN
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOSE SANJUAN in 1710 HARTFORD MILLS LANE, LEAGUE CITY, TX 77573 (NAICS 238130). OSHA activity number 345586341.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOSE SANJUAN
- Site address
- 1710 HARTFORD MILLS LANE
- City
- LEAGUE CITY
- State
- TX
- ZIP
- 77573
- Mailing
- 8328 GARLAND DRIVE, HOUSTON, TX 77017
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 10
- Ownership type
- A
Citations
10 citations on file for this inspection.
1926.25 A
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $1,865 · Current $0 Reduced
General-duty citation text
29 CFR 1926.25(a): During the course of construction, alteration, or repairs, debris was not kept cleared from work areas, passageways, and stairs, in and around buildings or other structures: a) At the jobsite, employees were exposed to trip and fall, laceration and puncture hazards from discarded scrap lumber with protruding nails.
Recent events (2)
- — I (S) $0
- — Z (S) $1865
1926.25 B
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $0 · Current $1,119
General-duty citation text
29 CFR 1926.25(b): Combustible scrap and debris was not removed at regular intervals during the course of construction: a) At the jobsite, scrap lumber from around and inside the framework of a house under construction was not removed at regular intervals.
Recent events (2)
- — I (S) $1119
- — Z (S) $0
1926.100 A
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $1,865 · Current $1,119 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or electrical shock and burns: a) At the jobsite, employees were exposed to struck-by hazards when they worked on the ground without wearing hard hats.
Recent events (2)
- — I (S) $1119
- — Z (S) $1865
1926.102 A01
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $2,486 · Current $1,119 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents: a) At the jobsite, employees were exposed to struck-by hazards when they used nail guns without wearing eye protection. b) At the jobsite, employees were exposed to struck-by hazards while using circular saws without wearing eye protection.
Recent events (2)
- — I (S) $1119
- — Z (S) $2486
1926.150 C01 I
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $1,865 · Current $0 Reduced
General-duty citation text
29 CFR 1926.150(c)(1)(i): A fire extinguisher, rated not less than 2A, was not provided for each 3,000 square feet of the protected building area, or major fraction thereof: a) At this jobsite, no fire extinguishers were provided, exposing employees to fire hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $1865
1926.300 B01
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $3,108 · Current $1,864 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: a) At the jobsite, employees were exposed to amputation hazards while operating a Skilsaw Model 67 circular saw with a piece of wood wedged between the blade and blade guard to prevent the blade guard from engaging. b) At the jobsite, employees were exposed to amputation hazards while operating a Makita Model 5007NB circular saw with a piece of wood wedged between the blade and blade guard to prevent the blade guard from engaging. c) At the jobsite, employees were exposed to amputation hazards while operating a Dewalt Model DW368 circular saw with a piece of wood wedged between the blade and blade guard to prevent the blade guard from engaging.
Recent events (2)
- — I (S) $1864
- — Z (S) $3108
1926.403 B02
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $2,486 · Current $1,492 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) At the jobsite, employees were exposed to electric shock hazards when they used an Intertek 15 amp, 125 Volt, relocatable power tap outdoors in wet conditions.
Recent events (2)
- — I (S) $1492
- — Z (S) $2486
1926.416 E01
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $1,865 · Current $0 Reduced
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) At the jobsite, employees were exposed to electric shock hazards when they used worn and frayed extension cords and electric saw power cords.
Recent events (2)
- — I (S) $0
- — Z (S) $1865
1926.1053 B01
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $3,108 · Current $1,842 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: a) At the jobsite, employees were exposed to a fall hazard of approximately 10-feet 3-inches and greater when they used an aluminum ladder that could not be extended three feet above the second floor landing.
Recent events (2)
- — I (S) $1842
- — Z (S) $3108
1926.501 B13
- Issued
- Jan 24, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $8,701 · Current $8,701
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system: a) At the jobsite, employees were exposed to fall hazards of approximately 13-feet 3-inches and greater when they worked within the framework without using fall protection. Jose Sanjuan dba San Juan Framing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1228387, citation number 1, item number 1, and was affirmed as a final order on October 5, 2017 , with respect to a workplace located at 1605 Noble Way Drive, League City, Texas.
Recent events (2)
- — I (S) $8701
- — Z (R) $8701
More inspections at Jose Sanjuan
View Jose Sanjuan's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345586341.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.