MANSFIELD, OH —
OSHA Inspection: MANSFIELD ENGINEERED COMPONENTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MANSFIELD ENGINEERED COMPONENTS, INC. in 1776 HARRINGTON MEMORIAL RD., MANSFIELD, OH 44903 (NAICS 332510). OSHA activity number 345629778.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MANSFIELD ENGINEERED COMPONENTS, INC.
- Site address
- 1776 HARRINGTON MEMORIAL RD.
- City
- MANSFIELD
- State
- OH
- ZIP
- 44903
- Mailing
- 1776 HARRINGTON MEMORIAL RD., MANSFIELD, OH 44903
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332510
- Employees
- 220
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C07 I
- Issued
- Jan 28, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $13,052 · Current $6,526 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: Mansfield Engineered Components, Inc. - Mansfield, Ohio: On or about November 1, 2021, the employer did not ensure that employees who service and maintain the #R-28 Milford Rivet & Machine Co. riveter (model S413; s/n 1342) were trained in the skills required for the safe application, usage, and removal of energy controls. Employees that unjam the machine were not trained to isolate and render safe the residual energy of the flywheel. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $6526
- — Z (S) $13052
1910.147 D
- Issued
- Jan 28, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): Mansfield Engineered Components, Inc. - Mansfield, Ohio: On or about November 1, 2021, the employer did not ensure that the #R-28 Milford Rivet & Machine Co. riveter (model S413; s/n 1342) was shut down and energy control steps were implemented to control the mechanical energy of the equipment's flywheel prior to servicing tasks. Employees who unjammed the riveter were exposed to injury from rotating parts and nip points. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 II B
- Issued
- Jan 28, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B):The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. Mansfield Engineered Components, Inc. - Mansfield, Ohio: On or about November 1, 2021, the employer did not ensure energy control procedures for the #R-28 Milford Rivet & Machine Co. riveter (model S413; s/n 1342) identified specific steps to follow to render safe the residual energy of the flywheel. Employees that unjam the machine were exposed to rotating part and nip-point hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332510)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345629778.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.