Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FEDERAL ELECTRONICS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of FEDERAL ELECTRONICS, INC. in 75 STAMP FARM ROAD, CRANSTON, RI 02921 (NAICS 423610). OSHA activity number 345632848.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Federal Electronics, INC. — free Get an email when a new federal OSHA severe-injury report for Federal Electronics, INC. is published. One employer, no account, unsubscribe in one click.
Site address
75 STAMP FARM ROAD
City
CRANSTON
State
RI
ZIP
02921
Mailing
75 STAMP FARM ROAD, CRANSTON, RI 02921
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423610
Employees
149
Ownership type
A

5 citations on file for this inspection.

1910.333 A02

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 13, 2022
Abate by
May 27, 2022
Penalty
Initial $13,052 · Current $6,826 Reduced
29 CFR  1910.333(a)(2): Where exposed live parts were not deenergized (i.e., for reasons of increased or additional hazards or infeasibility), work practices that were used were not suitable for the conditions under which the work was performed:   a) Debug Department: On or about 11/12/21, the employer did not ensure that safety-related work practices were implemented when employees were testing energized electrical circuits rated between 110V single phase and 480V 3 Phase.
Recent events (2)
  • — I (S) $6826
  • — Z (S) $13052

1910.333 C02

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 13, 2022
Abate by
Jun 30, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.333(c)(2):The employer did not ensure that only qualified persons were working on energized circuits and that qualified persons were familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools:  a) Debug Department: On or about 11/12/21, the employer did not ensure that qualified persons were testing energized electrical circuits rated between 110V single phase and 480V 3 Phase.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.335 A01 II

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 13, 2022
Abate by
Jun 30, 2022
Penalty
Initial $13,052 · Current $5,226 Reduced
1910.335(a)(1)(ii)  Protective equipment was not maintained in a safe, reliable condition and/or was not periodically inspected or tested:(a) (LOCATION) (IDENTIFY SPECIFIC OPERATIONS AND/OR CONDITIONS)   a) Debug Department: On or about 11/12/21 the employer did not ensure employees testing energized electrical circuits, rated between 110V single phase and 480V 3 Phase,  were utilizing electrical protective  insulated gloves which were not periodically inspected or tested since 9/2016.
Recent events (2)
  • — I (S) $5226
  • — Z (S) $13052

1910.132 D02

Other-than-serious Gravity 10 1 instance 2 exposed
Issued
Apr 13, 2022
Abate by
Jun 30, 2022
Penalty
Initial $0 · Current $1,000
1910.132(d)(2)  The employer did not verify, through a written certification, the identity of the workplace evaluated, the person certifying that the evaluation had been performed, and the date the hazard assessment was done:    a) Debug Department: On or about 11/12/21, the employer did not verify through written certification, the identity of the workplace, the person certifying that evaluation had been performed and date the hazard assessment was done for employees performing work, such as but not limited to;  testing energized electrical circuits rated between 110V single phase and 480V 3 Phase, utilizing gloves,  face and eye protection.
Recent events (2)
  • — I (O) $1000
  • — Z (S) $0

1910.335 B02

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Apr 13, 2022
Abate by
May 6, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.335(b)(2): Barricades were not used in conjunction with safety signs where it was necessary to prevent or limit employee access to work areas in which employees were exposed to uninsulated energized conductors or circuit parts:   a) Debug Department: On or about 11/12/21 the employer did not ensure that barricades were used to limit employee access when employees were testing energized electrical circuits between 110V single phase and 480V 3 Phase. The stanchions blocked the front area only.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Federal Electronics, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345632848.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.