ROCKLEDGE, FL —
OSHA Inspection: SPARTAN COMPOSITES, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SPARTAN COMPOSITES, LLC in 135 GUS HIPP BLVD., ROCKLEDGE, FL 32955 (NAICS 332710). OSHA activity number 345648422.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPARTAN COMPOSITES, LLC
- Site address
- 135 GUS HIPP BLVD.
- City
- ROCKLEDGE
- State
- FL
- ZIP
- 32955
- Mailing
- 135 GUS HIPP BLVD., ROCKLEDGE, FL 32955
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 78
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 C
- Issued
- May 16, 2022
- Abate by
- Jun 3, 2022
- Penalty
- Initial $8,702 · Current $4,349 Reduced
General-duty citation text
29 CFR 1910.22(c): The employer did not provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces. a) On or about November 15, 2022 at the Erie Press located at 135 Gus Hipp Blvd, the employer did not provide a safe means of access and egress in that an employee climbed into an pit approximately 8-10 feet underneath a press without to perform maintenance without the appropriate equipment.
Recent events (2)
- — I (S) $4349
- — Z (S) $8702
1910.146 C01
- Issued
- May 16, 2022
- Abate by
- May 26, 2022
- Penalty
- Initial $10,151 · Current $6,602 Reduced
General-duty citation text
29 CFR 1910.146(c)(1):The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces: a) On or about November 15, 2022 at the Erie Press located at 135 Gus Hipp Blvd, the employer did not evaluate a pit approximately 8-10 feet deep to determine if it was a permit-required confined space before allowing an employee to enter it to perform maintenance.
Recent events (2)
- — I (S) $6602
- — Z (S) $10151
1910.147 C01
- Issued
- May 16, 2022
- Abate by
- Jun 3, 2022
- Penalty
- Initial $10,151 · Current $6,602 Reduced
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) On or about November 15, 2022 at 135 Gus Hipp the employer did not establish energy control procedures, training or periodic inspections before servicing a Erie Press Systems 1500 Ton Valu-Mold machine.
Recent events (2)
- — I (S) $6602
- — Z (S) $10151
1910.217 C01 I
- Issued
- May 16, 2022
- Abate by
- Jun 3, 2022
- Penalty
- Initial $10,151 · Current $6,602 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es)(a a) On or about November 15, 2021 at 135 Gus Hipp Blvd the employer did not provide a method of guarding a Erie Press Systems 1500 Ton Valu-Mold to prevent employees from hazards at point of operation.
Recent events (2)
- — I (S) $6602
- — Z (S) $10151
1910.243 C03
- Issued
- May 16, 2022
- Penalty
- Initial $8,702 · Current $0 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: a) On or about November 17, 2021 at 135 Gus Hipp Blvd an employee operated a DeWalt handheld portable grinder without the guard installed.
Recent events (2)
- — I (S) $0
- — Z (S) $8702
More inspections at Spartan Composites, LLC
View Spartan Composites, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345648422.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.